.223 for bear, mountain goat, deer, elk, and moose.

[5811]

AAC 77gr TMKs from a 16" tikka. Still in stock at $0.85/ea. Every time I shoot a group, I end up wanting to buy more

 

[The Guide]

AAC 77gr TMKs from a 16" tikka. Still in stock at $0.85/ea. Every time I shoot a group, I end up wanting to buy more



View attachment 739203

View attachment 739207

I ordered 200 of them and they should be delivered this week. You are seein a little higher ES than I expected but SD is ok for $0.85 ammo. Look forward to shooting them and seeing what they will do for me.

Jay

 

[sconnieVLP]

Which stability calculator have you all found to be the most accurate? My .223 bolt gun is a Bergara Ridge SP with a 1-9 twist barrel. It shoots the 73 ELD-Ms well, although I have only tried it to 300 yards so far.

JBM gives me a return of 1.51 with the 77 TMK, but the Speer and Bison Ballistics give me ~1.2. I run into the same results with the 73 ELD-M, so I'm questioning how much weight to put into it. I'm going to get some and just shoot them to see, but curious what other folks are seeing.

 

[z987k]

Which stability calculator have you all found to be the most accurate? My .223 bolt gun is a Bergara Ridge SP with a 1-9 twist barrel. It shoots the 73 ELD-Ms well, although I have only tried it to 300 yards so far.

JBM gives me a return of 1.51 with the 77 TMK, but the Speer and Bison Ballistics give me ~1.2. I run into the same results with the 73 ELD-M, so I'm questioning how much weight to put into it. I'm going to get some and just shoot them to see, but curious what other folks are seeing.

If it doesn't have a value to input for tip length it's going to be wrong on every tipped bullet.
Even jbm assumes plastic, if you have an aluminum tipped bullet it won't be quite correct either.
JBM is the one you want to use.

 

[robtattoo]

I'm not sure if these have been posted before & quite frankly, I'm not trawling through 390+ pages to find out.

For those who're thinking or wondering why to pick the TMK over the TGK (the Gameking being a 'hunting bullet' after all.....)



That massive jacket difference is why the MK is so devastatingly effective & why the GK gives the mushroom, so beloved of the advertising folk.

 

[sconnieVLP]

If it doesn't have a value to input for tip length it's going to be wrong on every tipped bullet.
Even jbm assumes plastic, if you have an aluminum tipped bullet it won't be quite correct either.
JBM is the one you want to use.

That's what I suspected, simply based on the logic of more information = a better output.

Thanks!

 

[MEdude]

I'm not sure if these have been posted before & quite frankly, I'm not trawling through 390+ pages to find out.

For those who're thinking or wondering why to pick the TMK over the TGK (the Gameking being a 'hunting bullet' after all.....)

View attachment 739585View attachment 739586

That massive jacket difference is why the MK is so devastatingly effective & why the GK gives the mushroom, so beloved of the advertising folk.

I’m not a metallurgist but looking at the two jackets, the TMK looks like copper and the TGK looks more like brass. Could be just the picture. Does the TGK jacket seem harder, not just thicker?

Hypothesis….. This would add to mushrooming vs fragmentation.

 

[z987k]

I’m not a metallurgist but looking at the two jackets, the TMK looks like copper and the TGK looks more like brass. Could be just the picture. Does the TGK jacket seem harder, not just thicker?

Hypothesis….. This would add to mushrooming vs fragmentation.

Copper bullet jackets are almost always gilding metal, which is technically brass since it's some part zinc. 95/5 is typical.

 

[MEdude]

Wonder if they play with that ratio to influence frangibility vs malleability

 

[robtattoo]

I’m not a metallurgist but looking at the two jackets, the TMK looks like copper and the TGK looks more like brass. Could be just the picture. Does the TGK jacket seem harder, not just thicker?

Hypothesis….. This would add to mushrooming vs fragmentation.

They're not my photos, but I do know that the bullet halves were heated to cleanly melt out the lead, rather than prise out the cores & risk damaging the jackets.

 

[roosiebull]

AAC 77gr TMKs from a 16" tikka. Still in stock at $0.85/ea. Every time I shoot a group, I end up wanting to buy more



View attachment 739203

View attachment 739207

Waiting on them and sabers showing up Wednesday, if those tmk’s shoot well for me I’m going to try to get another 500, your report is encouraging

 

[wind gypsy]

The one that pushes a 77grTMK in a .223 to 1800fps out to 675yds with an 18in Tikka.

Lever, N540 are a couple options if chasing speed but yeah no way i'd chase that much speed..

 

[Tahr]

Lever, N540 are a couple options if chasing speed but yeah no way i'd chase that much speed..

H4895 comfortably pushes the 77TMK to 2930 fps at the muzzle through my standard Tikka .223. Its still holding 1930 fps at 500 yards.
I wouldn't be comfortable squeezing any more out of it though.

 

[The Guide]

Just got my order from PSA of 200 77tmk and 200 75 Saber Blade Black Tip. Packing list calls them 75 grain V-Max Black Tipped...

Jay

 

[Gettincloser]

H4895 comfortably pushes the 77TMK to 2930 fps at the muzzle through my standard Tikka .223. Its still holding 1930 fps at 500 yards.
I wouldn't be comfortable squeezing any more out of it though.

What does your accuracy look like?

 

[Castle Rock]

Great in my rifle
2206H (H4895) will become available first quarter next year after a long production pause due to it being reformulated

 

[Tahr]

What does your accuracy look like?

Great. Consistent around .75” or under for 5 shots. Depends on me mostly. H4895 (2206H) works best for me from 55 grn through to 80 with cup and cores’. I use BM2 or cfe223 for monos.

 

[CMCctx]

Does anyone have a lead on factory BH 77gr TMK? I - uh - burned through my stash faster than I could resupply. Got hooked on the stuff and told myself I could quit whenever I wanted to, it wasn't hurting anyone and it wasn't *really* a problem. Now my life is in shambles and I've even considered selling feet pics, but thought I'd do the rational thing like ask for help before I lost myself completely.

For shame.

 

[ElPollo]

Does anyone have a lead on factory BH 77gr TMK? I - uh - burned through my stash faster than I could resupply. Got hooked on the stuff and told myself I could quit whenever I wanted to, it wasn't hurting anyone and it wasn't *really* a problem. Now my life is in shambles and I've even considered selling feet pics, but thought I'd do the rational thing like ask for help before I lost myself completely.

For shame.

Reach out to @h2so4 . He is a black hills dealer and a Rokslide member. I bought a couple cases from him earlier this year. Good prices and good service.

 

[sierracharlie338]

First bunch of freedom seeds ready for their maiden voyage in a RSS