.223 for bear, mountain goat, deer, elk, and moose.

Joined
Aug 20, 2021
Messages
334
The brass ADI used in their Australian outback ammo brass was great. Current ADI brand ammo doesn’t measure as consistent but I haven’t shot enough of it to say if that is an issue or not.
Do the loads seem to be the same between Australian Outback and current ADI? I had tried some AO 223 55gr Blitzking with a previous rifle and it by far out shot any other factory ammo in that one. I wanted to try that same load in this new Tikka so I bought some ADI. In your experience did the performance change along with the name?
 

BLJ

WKR
Joined
Jan 19, 2020
Messages
2,346
Location
WV
1709575646210.jpeg

This is 8 from a Tikka 20” compact of the current production ADI 69’s.
My RAR 5.56 shoots them basically the same.

Shot off the bench with bipod and rear bag at 100 yards.
 
Last edited:

TOLeary

WKR
Joined
Dec 30, 2021
Messages
417
Location
South Carolina
Read first. Trust me. You will find this 223/TMK combo does a lot more damage than you think it should. It’s actually a solid option for big game way further than 200 yards. Reading this thread will challenge a lot of your preconceived notions about energy, bullet diameter and mass. It presents a lot of actual results from the field. That is something you rarely find related to ballistics. Most of what we think we know about ballistics is just stuff people have said for decades with no actual data. The final message of this thread isn’t that a 223 is magic. It’s that bullet diameter and mass have less impact on bullet performance than bullet design, and big heavy recoiling cartridges are not needed 99.99% of the time.
Appreciate the synopsis haha it’s a shit ton to go through. Couple questions - i thought i read that the 77gr TMK 223 is good 600 and under. Did I read that correct? What happens over 600yrds? Also do TMK bullets in larger bullets do the same amount of damage just scaled up because it’s larger?
 
Joined
Aug 20, 2021
Messages
334
Appreciate the synopsis haha it’s a shit ton to go through. Couple questions - i thought i read that the 77gr TMK 223 is good 600 and under. Did I read that correct? What happens over 600yrds? Also do TMK bullets in larger bullets do the same amount of damage just scaled up because it’s larger?
More precisely it's good at an impact velocity of 1800fps or higher. Exactly what range that happens depends on the particular load and barrel.
 

Veloci_Wrench

Lil-Rokslider
Joined
Apr 16, 2022
Messages
218
Here is some velocity data I gathered the other day with the AAC Sabre Black Tip 75gr.

10.5“ suppressed AR. I plan to hunt with this gun as an alternative to my Howa mini depending on terrain, expected range, etc. Figured I‘d run TMKs with the bolt gun, and try the Sabre stuff with the AR.

One shot didn’t register because I shot too quickly. Pretty decent ES and SD for such cheap ammo. Also seems pretty accurate with a red dot at 36 yards.

If this projectile is in any way similar to the 77TMK regarding velocity threshold, this is a 250 yard gun with Sabre ammo. TMK at same MV would be a 300 yard gun.

I also plan to chrono BH 77 TMK vs AAC 77 TMK vs Federal LE 77 TMK at some point.
 

Attachments

  • IMG_6681.jpeg
    IMG_6681.jpeg
    89.5 KB · Views: 74

260284

Lil-Rokslider
Joined
Oct 21, 2019
Messages
269
I only have experience with xbr but I’d say that’s fairly fast, my go to tmk load is about 2725 with a suppressed 16.5” barrel.
Anyone know what powder Stand 1 is using in their 77gr TMK load? I have H4895, Varget, CFE223 on hand. Need to work up a load for my grandson to use next fall out of my 18" 1-8" AR as it is the only rifle I have that will fit him.
 

260284

Lil-Rokslider
Joined
Oct 21, 2019
Messages
269
The 68 grain frontier isntbad either for training. I use it when I'm sighting in (save eldms til I'm close and finetuning) and kind of surprised at this 3 shot group I got a couple weeks ago when boresighting. Online it's pretty close in price to 73 g eldm so it might make more sense just to get eldm but I can't order online and my lgs has this for substantially cheaper so I'll shoot it from time to time.
View attachment 675938
My son uses the 68gr Frontier 556 load for his PSA 1-7" AR and it hammers coyotes.
 

Juan_ID

WKR
Joined
Feb 25, 2012
Messages
1,630
Location
Idaho
Anyone know what powder Stand 1 is using in their 77gr TMK load? I have H4895, Varget, CFE223 on hand. Need to work up a load for my grandson to use next fall out of my 18" 1-8" AR as it is the only rifle I have that will fit him.
I’d guess they use some kind of proprietary blend powder for their ammo. Of your choices I would think the 4895 would probably work the best.
 

Mulyhuntr

WKR
Joined
Jun 20, 2017
Messages
386
Location
CA
Anyone know what powder Stand 1 is using in their 77gr TMK load? I have H4895, Varget, CFE223 on hand. Need to work up a load for my grandson to use next fall out of my 18" 1-8" AR as it is the only rifle I have that will fit him.
H4895 works real good in my tikka with the 75eldm
 

Reddish

Lil-Rokslider
Joined
Apr 1, 2023
Messages
253
I’m rolling with TAC and it’s been good. My only powder I’ve tried though and hasn’t given me a reason to change.


Sent from my iPhone using Tapatalk
I’ve had issues with temp changes effecting TAC. In .308 and .223 so I only use that for plinking rounds. Same with H335.
 

260284

Lil-Rokslider
Joined
Oct 21, 2019
Messages
269
H4895 works real good in my tikka with the 75eldm
I am running it with the 75 ELDM in my Tikka Varmint, they are hammers at 3025 fps. I am working on a load for my 18" 1-8" AR so my small framed 8 yr old grandson can shoot his first deer with it. It is the only rifle that I can adjust to his short lop.
 

Mulyhuntr

WKR
Joined
Jun 20, 2017
Messages
386
Location
CA
I am running it with the 75 ELDM in my Tikka Varmint, they are hammers at 3025 fps. I am working on a load for my 18" 1-8" AR so my small framed 8 yr old grandson can shoot his first deer with it. It is the only rifle that I can adjust to his short lop.
What powder charge? I'm at 23.9gr and 2901fps from a 22" superlite.
 
Top