1911’s in general, 9mm versions specifically

RockAndSage said:
Long and medium "feel" better to me personally, in the feelsies category of handling a gun, but the longer a trigger is, the more you generally start seeing people send their shots left and low-left, especially when shooting at speed (for a right-handed shooter, they go right for a lefty).

My take on it, is that it's mostly an issue of geometry, between how the trigger-finger is oriented with the trigger - ideal orientation is 90-degrees at break. Slightly longer triggers have the pad of the finger pressing a bit more on the shooter's strong-side of the trigger, and a bit less on the weak-side - leading to a press that's not actually straight back to the nose. It's something that can be controlled for a bit in concentrated slow-fire, but when you speed things up and go fast, it tends to show up more.

I also suspect a short trigger makes things a bit more forgiving with your strong-hand grip when your trigger-finger isn't perfectly isolated from the rest of the muscles in your hand.

Overall though, shorter triggers tend to tighten groups up better, especially at speed. Best thing is to experiment and give it a hard go for a couple of cases of ammo.
Click to expand...
I wonder how much difference 90 degrees at beginning of press matters also?

My CZ (known for long triggers and many comp guys swap them out) is too long for me at the beginning of the DA pull, which makes for awkward shooting. It's fine when it resets to SA.

My Tisas 1911 is also just a little too long. But my Bul 1911 comes with a short trigger from factory, and I can get onto it immediately - don't have to think about it / don't get distracted by it. Makes a massive difference.
 
fwafwow said:
If anyone is on the fence, the best price I could find was at Able Ammo. Ordered last night and it’s been shipped. I spoke to a real human today to confirm receipt of my LGS FFL. Delivery expected Friday.
Click to expand...
Excited for you! In the meantime, I found out that Bul are coming out with a railed Commander-length version, so now I'm in two minds ... 🤪
 
Dobermann said:
What I was saying was that the 5" stainless version that matches my black one is on special, but there's a Commander length coming ...

Hang on ... by 'it', do you mean both? Hmm ... hold my 🍺
Click to expand...
“It” = both (more)
Formidilosus said:
If Kimber can keep up the quality, the Warrior DS seems like it will be the non-Staccatto 2011.
Click to expand...
Initial reaction: “I knew I should have waited a bit longer!”

Post-justification/rationalization reaction: “The universe is telling me to change all of my pistols to the 1911 platform, and this is how I can do it ‘economically’!”
 
Formidilosus said:
If Kimber can keep up the quality, the Warrior DS seems like it will be the non-Staccatto 2011.
Click to expand...

What is it about these versus the others that shows such promise? And if true a 4" or 4.25 length would be cool to see in the future. Also assuming grip size is not 1911 but 2011 (staccato, tisas ds) sized.

eta - Do all Kimber 1911 have their schwartz grip safety?

have you looked at the new Springfield 10-8?
 
Not to derail this any further but where do the pros in here stand on red dots on 1911's? Gotta have one if you can or messes with the aesthetic of the gun? I've always preferred the clean look of the classic 1911 but there's something fun about shooting with a dot as well.
 
Yooper said:
Not to derail this any further but where do the pros in here stand on red dots on 1911's? Gotta have one if you can or messes with the aesthetic of the gun? I've always preferred the clean look of the classic 1911 but there's something fun about shooting with a dot as well.
Click to expand...

My opinion, it does mess up the looks of a good 1911 just like a railed dustcover does, but I am definitely a function over form type of person so I prefer all my guns to have a RDS and a rail.
 
Just picked up this MAC 9 DS non-comp last week and got some parts in to create this abomination! I snagged it for $715 shipped.

Found a used Stac P grip, magwell, grip safety, mag release, mainspring housing, and trigger for $200(Springfield Prodigy grip, mag release and MSH for $50 would have been a better value) because the original texture was… well it wasn’t textured, I’ll put it that way. Also got this rmr07 used for $275. We’re wheelin and dealin baby!

Already broke it down, lightly sanded(mostly just got rid of high spots) and polished all the internals, as well as the frame rails. Slightly beveled and rounded the areas on the bottom of slide that were hanging on the disconnector, lubed it up and racked it a whole shit ton while watching TV. I suspect the extractor will need some tuning because it wouldn’t let go of a round no matter how much I shook the slide, and it feels pretty heavily sprung but gonna put 500 rounds through it before anything else. I can’t make it to the range until next week, but will report back with thoughts and findings.
 

Attachments

  • image.jpg
    image.jpg
    555.9 KB · Views: 74
Dobermann said:
The search for oils continues …
Click to expand...
SOTAR home-brew lube is basically all I use anymore. If you don’t feel like watching the whole thing it’s full-synth motor oil, and full-synth red mobil1 grease mixed to the consistency of honey. More runny for colder environments. Any grease would work. $20 for a lifetime supply. I also picked up some Of these brand bottles off amazon to throw in every chest rig & range bag so you’re never without. They’re designed for relatively thin oils so they don’t leak. You can mix it to your own desired viscosity. It’s not natural by any means. I also bring de-lead hand wipes in my range bag and always wash with dawn when I’m home.

If you’re fairly concerned about toxicity of artificial oil interactions then avocado or grape seed are probably your best bet for firearm related endeavors. I’m no scientist but I’d probably be more concerned with the explosion of fumes within 2 feet of your breathing holes, than skin contact(Unless you’re a smoker, but also strange prioritization there). You could probably try a similar method as above mixing beef tallow and whatever cooking oil of choice but I’m not sure if the consistency would stay over time.
 
Really wanting to jump into the $1k double stack 9mm 1911 game. Is there a consensus of what is the go to for reliability in that price range? Wait for the Kimber Warrior to be put through the paces?

I'm not wanting a Staccato level pistol for $1k. I'm just wanting to dabble in some local competitive shooting and fun on the range.
 
tikkashooter88 said:
Really wanting to jump into the $1k double stack 9mm 1911 game. Is there a consensus of what is the go to for reliability in that price range? Wait for the Kimber Warrior to be put through the paces?

I'm not wanting a Staccato level pistol for $1k. I'm just wanting to dabble in some local competitive shooting and fun on the range.
Click to expand...
If you're just getting into this (like me) I'd recommend the Tisas DS9 and put either a Wilson bullet proof or EGW extractor and run it. After a few rounds and some reading you'll figure out what else needs tweaking. Starting point under $1k and no complaints from me so far.
 
Billogna said:
If you're just getting into this (like me) I'd recommend the Tisas DS9 and put either a Wilson bullet proof or EGW extractor and run it. After a few rounds and some reading you'll figure out what else needs tweaking. Starting point under $1k and no complaints from me so far.
Click to expand...
That one definately caught my eye. Also looking hard at the MAC 9 DS. Question about the MAC, comp or no comp?
 
Billogna said:
Click to expand...
That looks like the Gen 1. Here's the Gen 2 with bull barrel for less. I think I'm going to have to jump on board...

www.vanceoutdoors.com

Tisas 1911 Duty Double Stack Gen 2 9mm Optic Ready Pistol with Bull Barrel

Buy Tisas 1911 Duty Double Stack Gen 2 9mm Optic Ready Pistol with Bull Barrel (1911 DUTY B9R DS) now at Vance Outdoors. Wide selection of Tisas Semi-Automatic Handguns for sale online today.
www.vanceoutdoors.com www.vanceoutdoors.com
 
tikkashooter88 said:
That looks like the Gen 1. Here's the Gen 2 with bull barrel for less. I think I'm going to have to jump on board...

www.vanceoutdoors.com

Tisas 1911 Duty Double Stack Gen 2 9mm Optic Ready Pistol with Bull Barrel

Buy Tisas 1911 Duty Double Stack Gen 2 9mm Optic Ready Pistol with Bull Barrel (1911 DUTY B9R DS) now at Vance Outdoors. Wide selection of Tisas Semi-Automatic Handguns for sale online today.
www.vanceoutdoors.com www.vanceoutdoors.com
Click to expand...
Looks like it's store pick up only. If I had one of those nearby I'd jump all over that!!

edit: Disregard OOPS!! I just saw the ship to me button....
 
You must log in or register to reply here.

Similar threads

RWT
Need assistance diagnosing 1911 issue
2 3
Replies
44
Views
2K
RockAndSage
RockAndSage
kad11
WTS Tisas Nightstalker 1911 9mm + extras
Replies
2
Views
501
kad11
kad11
jjohnsonElknewbie
WTS Pair of .45s for sale
Replies
7
Views
593
jjohnsonElknewbie
jjohnsonElknewbie
J
  • Locked
Sold S&W 59 9mm
Replies
4
Views
394
jgraham1
J
schnitzerphoto
  • Locked
Sold Sig Sauer 1911 Carry Nitron + Upgrades
Replies
11
Views
851
schnitzerphoto
schnitzerphoto

Latest posts

Featured Video

Latest Articles

Back
Top