130 Grain Class 6.5 Creedmoor Bullets

Joined
Dec 28, 2019
Messages
1,941
140 + class bullets are largely considered the sweet spot for the 6.5 CM, but my 20" barrel Tikka UPR loves the 130 grain Berger OTMs. I get the same velocity with the 130s out of my 20" barrel as the 140s for a 24" barrel.

Anyone hunting with sub 140 grain 6.5mm projectiles? The 130 OTMs by Berger are tack drivers and the ogive measurements are very consistent.
 
Joined
Jul 24, 2017
Messages
474
Location
AR
I know 130 TMKs have a good reputation. From memory I’ve read where the Berger 130 hybrids/OTMs work decent keeping the velocity up. I would like to try the 130 ELDs myself but it’s likely wasted on deer for me.
 
Joined
Dec 1, 2023
Messages
91
The 130 HVLD has been my primary hunting bullet for 10 years or more and has worked great. I’m now shooting the 130 otms just because that’s all I could get my hands on
Developing a hunting round with the 130 VLD-H right now. Looking forward to shooting some critters with it. Heard good things about Berger bullets, usually shoot Nosler.
 

Dos XX

WKR
Joined
Dec 29, 2018
Messages
894
The 130 gr Berger OTM has a short bearing surface and will shoot faster than some 130's. It is a short bullet made to fit in a magazine. They are very jump tolerant and easy to tune. It kills stuff, too. I shoot them out of a .260 at 2950 ish fps.
 

ThatDUDE

WKR
Joined
Oct 8, 2023
Messages
385
Mostly 130gr TMK, 130gr ELD-M, and 130gr Berger OTM Hybrid AR. Of those my presence is the TMK for it terminal behavior. The ELD-M is his as welll, with a bit less penetration at higher impact velocities and less upset at lower impact velocities. The Berger 130gr OTM Hybrid AR is a very good bullet, but needs to be kept at 2,050fps ‘ish or higher for reliable upset.
 

Taudisio

WKR
Joined
Jan 20, 2023
Messages
1,104
Location
Oregon
My pops has folded two bucks DRT with the 130gr hornady CX-in California. He has been more than impressed, “That creedmoor hits harder than my 7 mag!”
 
Top