1 premier custom rifle vs 2 custom tikkas - what choice to make?!

another vote for two tikkas. I personally don’t see the point of a super premium custom rifle unless you’re a whiz bang long distance competitor. For hunting purposes, tikka.
 
Build 2 that are identical in stock, barrel weight, scope selection, and ballistics if you can… that’s always made a lot of sense to me.

I went this route recently with 3 almost identical tikkas in 1-8 22-250, 6mm Creed, and 6.5 Creed.
 
I have a semi custom tikka and I have a full custom. Building my second full custom right now for my daughter and for me to use as a backpacking rifle. The full custom is better in every way. Fit, finish, balance, groups, trigger, eye appeal, weight. Only thing the tikka wins in is price. A rifle is a multi decade investment, I’m not going to get worked up over 1000-2000 dollars.

My opinion is predicated on having the right gunsmith build the rifle.
 
Last edited:
B_Reynolds_AK said:
I think it’s the wrong way of looking at it, comparing a Tikka in one category and a “Premium” in the other.

I sold my “Premium” AnTi X and moved to 2 Tikka’s. Will not be going back. Would have done so even if the Tikka action was double the price.
Click to expand...
Shhhhhhhh. Let’s not give Tikka any ideas.
 
DisplacedHusky said:
Shhhhhhhh. Let’s not give Tikka any ideas.
Click to expand...
This too, Tikka prices have gone up in just the past year and part of my wants to tell people to get a custom, rather than tell them to do what I did myself.

Plenty of people are happy with customs, and as @Article 4 and @Ucsdryder show prefer them. And it is not my money, so I don't think it would be bad to advise people in a way I would not take myself... Though not good either. I've also never had a custom, so.
 
Last edited:
“I joined rokslide and all I got was this lousy T3x”

Took the advice gents, scored both used unfired at my LGS for a hair over 1200.

Drop your semi custom/custom tikkas on here!
 

Attachments

  • IMG_0441.jpeg
    IMG_0441.jpeg
    1.7 MB · Views: 73
I keep using an old $200 receiver and good barrel to show the kids expensive actions aren’t required. A 1/2 MOA barrel still shoots 1/2 MOA and a 1 MOA barrel shoots 1 MOA.

I used to keep two identical rifles - same caliber, scopes, stocks, and luckily the same ammo shot well in both. I’d kind of like to do that again when another $200 action comes along.
 
_MountainBum said:
“I joined rokslide and all I got was this lousy T3x”

Took the advice gents, scored both used unfired at my LGS for a hair over 1200.

Drop your semi custom/custom tikkas on here!
Click to expand...
Both for 1200 was a smoking deal. Should be some deals on prefits around Christmas, what calibers?
 
Go with a custom, a little bit of money difference is nothing when compared to the years you’ll have it. You can pick and choose exactly what you want the rifle to be.

I know tikkas shoot great but if I'm building a rifle I want it the way I want it and not have to basically strip everything off it and replace.

Life is too short to not like what I’m shooting.

In all reality how much are you really saving? If I bought a Tikka I’d change the stock, bottom metal, and most likely the barrel. So in esssnce, I’m just using the action, which I’d want UM to trick out anyway.
 
Hnthrdr said:
Both for 1200 was a smoking deal. Should be some deals on prefits around Christmas, what calibers?
Click to expand...
Primarily wanting to build an 18” 6 creed, then not decided on the other. Maybe a 20” 6.5 PRC
 
Hnthrdr said:
Nice I am getting a 20” 6cm put together, just waiting on my xlr chassis, I have another .308 tikka that might stay the same for a while or might get another makeover
Click to expand...
I’m trying to find an XLR for whichever of these turns into the 6 creed. See them used on here every once in awhile. Have time to wait it out. What ore fits do you reccomend? I built one a fluted 18” from PBB for around 650 but don’t see a ton of other options other than proof. Pretty much over carbon barrels. Want to go back to steel.
 
180ls1 said:
Personally, I would build the 18" 6c and then run it for a season or so and see what you do/don't like about it before building the other. Nothing wrong with leaving the other one alone for a while.
Click to expand...
Smart, may end up being the move. No problem leaving one stock for a backup.
 
_MountainBum said:
“I joined rokslide and all I got was this lousy T3x”

Took the advice gents, scored both used unfired at my LGS for a hair over 1200.

Drop your semi custom/custom tikkas on here!
Click to expand...

Screaming’ deal. Here’s a few pages to give you some ideas!

Let's See Your Semi-Custom Tikka Builds

This is *chefs kiss* Any regret on PRC vs CM? How’s the shootability out of an 8lb 10oz rifle? I’m over 11lb all up (with a can and bipod) on a 7rm looking to shed weight and ft lbs of recoil, just undecided on a PRC or CM Cascade, It’s a pleasure to shoot at that weight. I am coming from a...
rokslide.com rokslide.com
 
_MountainBum said:
I’m trying to find an XLR for whichever of these turns into the 6 creed. See them used on here every once in awhile. Have time to wait it out. What ore fits do you reccomend? I built one a fluted 18” from PBB for around 650 but don’t see a ton of other options other than proof. Pretty much over carbon barrels. Want to go back to steel.
Click to expand...
I ended up snagging a x-caliber carbon on their Halloween sale. Not attached to carbon by any means but seemed like a good deal. I almost bought a PBB before that hybrid lite I think. I have my barrel already which is nice. Seems well made, but can’t speak to it yet until I start shooting it.
 
You must log in or register to reply here.

Latest posts

Featured Video

Latest Articles

Back
Top