Search results

  1. D

    Adjusting Launcher angle of Hamskea Rests

  2. D

    Adjusting Launcher angle of Hamskea Rests

  3. D

    Adjusting Launcher angle of Hamskea Rests

    One of the great features of the Hamskea rests is the ability to adjust the launcher angle to fit your specific needs. This gives shooters the ability get a specific amount of fletching clearance for higher or lower profile vanes as well as being able to swap between the longer target launchers...
  4. D

    Hamskea Epilson Tweak

    You can trim and burn the end of the cord. Just make sure to leave yourself enough of a tag end to hold onto if you need to adjust the cord tension.
  5. D

    New Sevr Hybrid

    I think the added bleeder blade is really going to help with the blood trails and a little extra cutting surface is never a bad thing. However, the chisel point looks to be rounded compared to the older models. It'll be interesting to look at them a little closer in person, but I'm sure I'll...
  6. D

    Hamskea Rest

    I agree with others that you might have some nock pinch. Another thing to think about is having too high of draw weight. If you aren't able to draw the bow keeping it vertical, then you might want to drop the poundage a little so that you can make a smooth controlled draw during a hunting...
  7. D

    Kuiu Quiver

    I think this quiver corrects a lot of issues that came with other quivers and does so at a great price.
  8. D

    Sevr BH and Elk

    I'll agree with what has already been said. The blades don't come as sharp as I would expect, but I was able to sharpen them on my work sharp stand and have been very happy with the results. The 2.0 heads have passed through everything I have shot them at. I have a couple heads dedicated for...
  9. D

    QAD MX2 vs Hamskea Epsilon

    There are some pretty easy fixes for the two concerns you have. 1. For any noise that might occur before drawing your bow back, you can put a strip of felt on the far edge of the riser shelf. The arrow will only contact the far edge, so there is no reason to put felt over the whole riser...
  10. D

    Sold RH Mathews Wake 29.5/70

    Selling my Mathews Wake with 70lb limbs. It had 29.5" mods on it right now but I have more mods. You can still order mods from mathews as well. The bow shoots great and is in amazing shape, I just don't shoot it enough to justify having it sit around. Looking to get $750 OBO and not really...
  11. D

    Timing of a Limb Driven Rest

    Results I was getting with my personal V3 is one of the reasons we decided to take a closer look at this topic and really see what gains can be found. So far this is the most efficient way I've found to find the optimal location to mount the cord.
  12. D

    Hamskea Epsilon

    The containment brackets were design to be shot with the cock fletching pointed at 12 o-clock when using a 3 fletch. If you get contact with the roller guards in this orientation it is possible that your rest is adjusted outside of the recommended Center-Shot range. I recommend setting your...
  13. D

    Hamskea Epsilon

    I shoot a 90 degree 4-fletch with my Epsilon without any issues. Where exactly are you getting the contact?
  14. D

    Arrow rest advice and feedback - QAD/Hamskea

    The actuation cord is often brought up as a concern for people who haven't used a limb driven rest before. When the bow is fully assembled the actuation cord of the rest sits between the arrows in the quiver and the bow cables. For something to catch on the cord, it has to either be shoved...
  15. D

    Hamskea Easy Third Axis Level- Knob Stuck

    Yeah I'm the Technical Lead at Hamskea. Glad to hear Millie got you taken care of.
  16. D

    Hamskea Easy Third Axis Level- Knob Stuck

    The knob on the Easy Third Axis Level should spin freely. The only thing that could have caused this issue is if some of the Red Loctite got into the threads of the level body. If you aren't able to get it loose, let me know and I'll get it taken care of.
  17. D

    Hamskea arrow sight tool?

    We have the Easy Third Axis Tool and Gen2 Level available on our website. https://www.hamskeaarchery.com/product-category/sight-leveling/
  18. D

    WTT Dialed Arxos bow sight

    I have a NIB Dialed Arxos sight black with the 0.010 pins I'd like to trade for a 3 or 5 pin Axcel Landslyde carbon pro. Sent from my SM-G975U1 using Tapatalk
  19. D

    Sevr Broadheads...More Trouble Than They Are Worth

    I've been happy with the performance so far. The blood trails don't look like buckets dumped on the ground, but easy enough to follow. They have killed everything I have shot with them so far. As far as them opening in the foam quivers, I have a tightspot 2 piece quiver and I just hold the...
  20. D

    Hamskea Epsilon as Cable driven

    Thanks for the feedback on the knobs. I know we have details in the instructions, but I'll pass your comments to the rest of the design team.

Latest posts

Featured Video

Stats

Threads
349,304
Messages
3,679,095
Members
79,909
Latest member
Rizzo

Latest Articles

Top