Your Favorite Knight UltraLite Load

[FishN]

Starting over as we’re now allowed to used 209 primers. Have been using 110gr 777, Harvester green high pressure sabots with their white scorpion 300gr 50cal bullet, with a RWS musket cap.

What’s your preference….?

 

[landis07]

Blackhorn 110 grains
CCI magnum 209 primer
Barnes T-ez 250


Sent from my iPhone using Tapatalk

 

[FishN]

Took the Knight UL out to the range today to work on 3-shot load groupings with BH-209 at 90gr, 95gr, 100gr, 105gr, and 110gr. All shots were at 100 yards using Harvester green sabots with their 300gr, .50 cal white Scorpion bullet. Used CCI 209 primers, but they seemed to get jammed in the bolt after firing.

Gun seems to really like 100gr with that load. Used to shoot 777 but never got that consistancy with musket caps.

Any thoughts on what might be causing this issue?

 

[tracker12]

100 grains T777 or BH209, 240 Grain LeHigh Defense in a MMP 24 sabot. Win 209. The 340 grain ELDX are super accurate but they fit loose in my barrel and I have had miss fires with them. I have used a felt wad behind them with no problems. This is a 3 shot group at 100 yards.

 

[lazydrifter]

I know this isn't fixing the problem, but on my knight I use Winchester 109 primes and they stick too after firing. I just lift the bolt and close it ( to re-cock it) and then open the bolt and they fall right out.

 

[Don Qui Puncher]

82 by weight bh 209 veggie wad and a 275 Parker be275 .45 has been great in mine

 

[Wrench]

My knight absolutely hammers with 80grs 2f swiss with a lubed felt wad and a 420 no excuses using a musket cap. Ignition is instant and reliable.

 

[970thinair]

I use 100 grains of 777, Federal ML primers, and CVA ELRs in my 45 cal UL. It is very accurate (using open sights) but I'll likely try different bullets next go around.