Your 6.5 CM Data

Justin Crossley

Administrator
Staff member
Joined
Feb 25, 2012
Messages
7,631
Location
Buckley, WA
Bullet, barrel length, powder charge, and velocity?

I'm putting together a rifle with a 24" barrel and thinking of shooting the 140 RDF for competitions.
 

woods89

WKR
Joined
Sep 3, 2014
Messages
1,846
Location
Southern MO Ozarks
All out of a 22" Hawk Hill. This is one of those barrels that spoils you.

156 Berger
Lapua SRP
41.3 RL 16
CCI 450
COAL 2.880ish
2650 fps

140 Elite Hunter and 140 Hornady BTHP
Lapua SRP
41.8 H4350
CCI BR-4
COAL- 140 BTHP 2.800
140 Elite Hunter 2.820
2730 fps

130 TMK
Lapua SRP
39.2 Varget
CCI BR-4
COAL 2.800ish
2830 fps

Work up on your own! 156 load is just a bit spicy.
I intend to do some work with 130 TMK and H4350 this summer. The 130 TMK is probably my solution going forward.
 

Lawnboi

WKR
Joined
Mar 2, 2012
Messages
8,510
Location
North Central Wi
Lapua brass, 41.5 of h4350, about any 140. This has worked for a lot of barrels. Going around 2750 in a 26”.

I’m personally a fan of 140 and 144 hybrids.

Can be pushed faster, but I’m not a fan of being on the ragged edge of pressure, especially on a match rifle.

Planning on this for NRL? Iv been thinking of getting a 24” creedmoor in a light contour, or a proof prefit for nrl next time around. Thinking I can take my current prs rifle with a lighter barrel and no weights, and make it work for open heavy. That and I’m thinking of cutting most prs style matches out and trying to shoot more nrl hunter.
 
Last edited:
OP
Justin Crossley

Justin Crossley

Administrator
Staff member
Joined
Feb 25, 2012
Messages
7,631
Location
Buckley, WA
Planning on this for NRL? Iv been thinking of getting a 24” creedmoor in a light contour, or a proof prefit for nrl next time around. Thinking I can take my current prs rifle with a lighter barrel and no weights, and make it work for open heavy. That and I’m thinking of cutting most prs style matches out and trying to shoot more nrl hunter.
Yes, I'm building a rifle for the Open Light division.
 
OP
Justin Crossley

Justin Crossley

Administrator
Staff member
Joined
Feb 25, 2012
Messages
7,631
Location
Buckley, WA
I am pulling the barrel off the ctr and doing the same thing. I have a feeling a lot of guys are following suit haha

I'm not sure if a lot of people are doing it but my heavy barrel on my 6.5 Cheater Mag should be toast by then and I want to go lighter to match my hunting rifles closer.
 

TX_Diver

WKR
Joined
May 27, 2019
Messages
2,617
Starline brass - 19.25" T3x lite barrel. 143 ELD-x and 140 elite hunters
RY3JNPW.jpg
 

TX_Diver

WKR
Joined
May 27, 2019
Messages
2,617
Data from before that finding pressure w/ various bullets. Same 19.25" barrel.

T3x Lite w/ original barrel cut to 19.25". New starline brass 1x resized w/ CCI primers & H4350. Measured w/ a magnetospeed sporter attached to a suppressor w/ sensitivity on Hi 2.

Went through a ladder with some 140s and 143s today just to get an idea of what velocity I'm getting. 32 degrees out. 70 in the house and I brought rounds out 3 at a time and shot them in different orders each time. Just trying to see if I get pressure signs anywhere. Loaded as long as they'd fit in my CTR magazine. I have all the measurements written down and how far off the lands they are in a different book. I loaded these a year ago and never got around to shooting them. Will post headstamp pics later and see if anyone has an opinion on pressure signs. Maybe a minor swipe at 43+ but I get that fairly often from this gun so hard to say.

One thing that's interesting is that the 143s are slightly faster than the 140s. Guessing that has to do w/ bullet shape and bearing surface? 147s are also faster but it was 15 degrees warmer when I shot those.

140 Hybrid Target
H43506.5 CMCharge363738394040.54141.54242.54343.5
140 HybridBook Velocity2378 @36.52634
Berger34-40.3Chrono Velocity2298235424352450250925292556260526342657


140 Elite Hunter
H43506.5 CMCharge38394040.54141.54242.54343.5
140 Elite HunterBook Velocity24712731
Berger38 to 42.3Chrono Velocity2290234424082460247925122570259826332649

143 ELD-X
H43506.5 CMCharge363738394040.54141.54242.54343.5
143 ELD-XBook Velocity24002500260026502700
HornadyChrono Velocity2344240524442511250325572563262926512662


Older data for reference
156 EOL shot at 42 degrees
H43506.5 CMCharge3738394040.54141.54242.5
156 EOLBook Velocity2405 @36.52627 @ 40.3
Berger34-40.3Chrono Velocity226522822354244924472473250025362576

147 ELD-M w/ CCI Primers at 47 degrees
H43506.5 CMCharge363738394040.54141.54242.543
CCI147 ELD-MBook Velocity2400250025502600
Hornady34-40.3Chrono Velocity22522291232124552495249125482553258326162629


147 ELD-M w/ WIN Primers at 47 degrees
H43506.5 CMCharge363738394040.54141.54242.543
WIN147 ELD-MBook Velocity2400250025502600
Hornady34-40.3Chrono Velocity22542323237024302510253425582590262126582637
 

TX_Diver

WKR
Joined
May 27, 2019
Messages
2,617
Possibly some duplicates but back when I was thinking of sticking with 147 ELD-M (and then went down the rabbit hole...)

gw46kB2.jpg


42gr H4350
2aXj0Ka.jpg
 
Joined
Aug 10, 2015
Messages
2,806
A friend loaded these for me awhile back.

I did notice he has a "typo" on the card. It should read IMR 4350, not 4053.

Edit: He believes 41.8 was the final charge weight.
 

Attachments

  • 4940.jpeg
    4940.jpeg
    113.8 KB · Views: 35
  • 4941.jpeg
    4941.jpeg
    132.6 KB · Views: 34
  • 3698.jpeg
    3698.jpeg
    119.8 KB · Views: 34
Last edited:

sndmn11

"DADDY"
Joined
Mar 28, 2017
Messages
10,613
Location
Morrison, Colorado
Staball 6.5 (cheap, temp insensitive, meters easy)

140 vld hunt
Hornady brass 45.2gr = ~2860fps
Alpha brass 44.5gr = ~2828fps

2.815 overall length
2.173 to ogive

24" vanguard with factory brake

20" vanguard with brake and Hornady brass 45.2gr was 2830fps
 

XLR

WKR
Rokslide Sponsor
Joined
May 24, 2018
Messages
738
Location
Grand Junction, CO
I have ran the same loads in a few different rifles.

All of them were Lapua SRP Brass, CCI 450, H4350 and 147 ELDM.

41 Grains
28" Preferred barrel - 2803 fps
26" Bergara MG Lite - 2760 fps

40 Grains
28" Preferred barrel - 2698 fps
26" Bergara MG Lite - 2673 fps
 

JGRaider

WKR
Joined
Jul 3, 2019
Messages
1,924
Location
West Texas
Can't believe more people aren't shooting the 139 Scenar. At 2775fps, it's just stupid accurate, and a very reliable killer of deer sized game and hogs. Doesn't get any better for the 6.5CM IMO.
 
Top