X bolt (Hells canyon) scope mounts

[Fadetoblack188]

How are the Talley scope mounts for the x bolt? Also what height did everyone go with

I am going to put a vortex viper hst 4-16x44

 

[Northpark]

For my Zeiss conquest 4-6x44 I went medium height Talley’s on my hells canyon. They have worked perfectly for me.

 

[Fadetoblack188]

Cool. They seem to be like 20 bucks cheaper then the brownings. Wasn’t sure if I should just spend the extra 20

 

[TNKnoxville]

I have the mediums on my XBolt Speed and a 42 mm scope. I have the highs on my XBolt Max Long Range with a 50 mm. Awesome rings. Be sure that you watch which ring is which, there is a front and back ring and different length screws. Also don't over tighten, Browning does not give out torque specs. The threads are a bit shallow. I used loctite and snugged them down, no issues.

 

[Fadetoblack188]

Thank you

 

[Fadetoblack188]

Now do I get black or Cerekote gold to match barrel hmmmm

 

[TNKnoxville]

My speed has the ceracoat barrel and the rings match it perfectly!

 

[Fadetoblack188]

Yeah I might just go with black. Going to look at some pics

 

[Fadetoblack188]

What’s the weight of your x bolts with scope on?

 

[Deadspace]

If that has a 1” tube I have a set that I’ll never use and can send them to ya to try out.

 

[TNKnoxville]

Both my scopes are 30mm, the Max long range weighs about 10.5 lbs and the speed about 9 lbs both with scope.

 

[Fadetoblack188]

If that has a 1” tube I have a set that I’ll never use and can send them to ya to try out.

thank you! But it’s actual a 30mm. I appreciate it though

 

[Fadetoblack188]

Both my scopes are 30mm, the Max long range weighs about 10.5 lbs and the speed about 9 lbs both with scope.

Looks I’ll be at 8:4oz empty. I was hoping to be under 8 but I guess I’ll take that for a 300wm

 

[Dobermann]

Funny timing - I just installed medium Talleys on a X-Bolt for an LRTS 3-12 x 44 mm - height is perfect with enough space for Aadmount caps (but probably not Tennebraexes).

I was under the impression that Talley makes them for Browning ... is that incorrect?

 

[TNKnoxville]

Yes Tally makes the one piece rings for Browning.

 

[Fadetoblack188]

oo ok i didnt know that. ok cause the prices are so different on them depending what site you look. like 35 bucks cheaper depending on were.

 

[2five7]

I've got mediums on mine with an SIII 6-24x50, plenty of room.

 

[ericF]

Talley also makes a one piece rail for the X-bolt with a built in bubble. I tried it a couple months ago, but with low rings it felt a little high for me on my standard Xbolt. I was moving up to a 30mm Zeiss V4 4-16x50 from a 1" tube and the Talley lows worked perfectly. I had a Trijicon Tenmile in 50mm that I also tried on there, but it didn't work with the lows and would have required mediums.

 

[TNKnoxville]

The ones I mentioned on my rifles are the one piece Tallys.

 

[Fadetoblack188]

So I wonder if the lows will work with a 44mm vortex