Will/Does Anyone Make a 308 Win Suppressor?

[dårlig jeger]

I'm looking at all of the creedmoor-sized suppressors like the OG6S, the ZG nano and 6.5, etc, and I'm wondering if there will be a similar-sized suppressor made for 308 win?

I'm not sure how much bigger it will need to be than an OG6S, but it seems like similar charges and pressures.

I know theres some CYA involved in suppressor manufacturers making every 30 cal suppressor good for 50 rounds of rapid fire 300 RUM, but it seems like suppressors are getting more and more niche and cartridge specific, maybe there's a market for a 308 win, 7-08, 6.5 creed sized can?

 

[Tanner]

Echo Zulu Altitude 30 would be a good fit.

 

[Cory_Shoot2Hunt]

So you want a og6 or zg6.5 with a 30 cal bore? I mean our gen 2 og30 is shaping up to be pretty dang good and will only be 4in muzzle forward unless something changes. Unless you’re talking smaller? It’s hard to make a smaller can that’s efficient with a 30 cal bore if that’s what you’re wanting.

 

[dårlig jeger]

So you want a og6 or zg6.5 with a 30 cal bore?

Yes, pretty much exactly.

I mean our gen 2 og30 is shaping up to be pretty dang good and will only be 4in muzzle forward unless something changes.

I am looking forward to this. Do you think you would make it any smaller or lighter if it was 308win ish only?

Unless you’re talking smaller? It’s hard to name a smaller can that’s efficient with a 30 cal bore if that’s what you’re wanting.

I'm not a suppressor need by any means, so I don't know how much the bore volume changes suppressor design.

Thank you for the response.

 

[Huntnpack 2]

OP, I understand where you’re coming from.
An optimum suppressor approach or as close as possible is ideal. Unfortunately it’s somewhat difficult to find. Keep an eye on what Unknown is
coming out with.

 

[JF_Idaho]

So you're basically looking for a can that's designed to be small/light vs supression:size?

A .308 .30 cal can that is sized smaller to be just as loud as a 300rum through a "normal" .30 cal can?

I think that could kind of relate to K size cans.

I think probably most 30 cal cans are optimized for .308 since that is kind of the defacto testing cartridge. The magnums are more for destructive testing.