stan_wa
WKR
All right, well like many of you. I think it’s really important for your rifle to be zeroed well and to stay zeroed.
I sightes my rifle in and I established a zero using 10 shots and the center was right where I expected it to be using the group analysis app I was splitting the difference between .1 mill and couldn’t get the center of the group any closer than it was.
So I take the rifle hunting shoot some rocks while I’m out there and seems to do fine. Come home make a trip out to the range two weeks later after no significant abuse and just ridding around highway in the case I’m .4 mil low .2 mil right @ 100 yards
Both initial and follow up zero where shot with the same bipod and rear bag.
Environmentals did change 500 ft 50 deg vs 1800 ft 75 degree
Set up
Rifle : havak element with integrated pic rail
Scope :trijicon ten mile ffp 3-18
Rings : seekins precision rings
Install : seekins recommended torque value with blue lock tite in actions screw, ring to pic rail screws and scope clamp screws .
I’m stumped only thing I can think is maybe I need to center the rings on the tube more , rear ring is .150” away from zoom
Ring
I sightes my rifle in and I established a zero using 10 shots and the center was right where I expected it to be using the group analysis app I was splitting the difference between .1 mill and couldn’t get the center of the group any closer than it was.
So I take the rifle hunting shoot some rocks while I’m out there and seems to do fine. Come home make a trip out to the range two weeks later after no significant abuse and just ridding around highway in the case I’m .4 mil low .2 mil right @ 100 yards
Both initial and follow up zero where shot with the same bipod and rear bag.
Environmentals did change 500 ft 50 deg vs 1800 ft 75 degree
Set up
Rifle : havak element with integrated pic rail
Scope :trijicon ten mile ffp 3-18
Rings : seekins precision rings
Install : seekins recommended torque value with blue lock tite in actions screw, ring to pic rail screws and scope clamp screws .
I’m stumped only thing I can think is maybe I need to center the rings on the tube more , rear ring is .150” away from zoom
Ring
Last edited: