Which magnum rifle

[mxgsfmdpx]

What about the forceplex reticle? I assume y’all are saying you don’t like the MOAR reticleView attachment 984875

What would his plan be for wind with this reticle?

 

[Dfou]

What would his plan be for wind with this reticle?

We don’t have alotta wind here. Flat land. But I’d guess he would just have to estimate a hold over for wind. The dots are only accurate one a certain power for SFP scopes anyway, correct? What do people normally do for wind with SFP scopes?

 

[Dfou]

You must have forgotten your teenage years

I doubt there are many people here who didnt hunt with some flavor of bigass rifle at some point in their lives. Hell I've been educated and Im still doing it. At 15 years old if my old man would have tried to talk me into a smaller rifle id have considered it an insult to my "manhood" and gotten the biggest loudest hardest kicking thing on the rack.

Facts. We duck hunted a lot when I was a kid. I went from a 410 straight to an Ithaca 12 gauge feather lite. It stomped my ass but at that age I wouldn’t have had it any other way

 

[Chris in TN]

What do people normally do for wind with SFP scopes?

It's not a big problem with scopes that top out at a relatively low power; just shoot at max magnification. Or if your scope tops out at 16x you can shoot at 8x and each wind hashmark will be double the stated value.

You can absolutely use the forceplex reticle for wind holds - check the reticle subtension dimensions and the best you'll be able to do is to use the edges of the thin center section as a wind hold, and maybe do a half-distance. In the case of the SHV forceplex reticle that would leave you with the edge of the thin part as a 2.5moa wind hold (based on NF's published subtensions) and you could split that for a ~1.25moa wind hold.

Will it be precise? No. Would I rather have that, than have the MOAR reticle that you can't see at all in the dark without turning on the illumination? Yes.

Like you, I don't shoot in a lot of wind. I do, however, shoot a lot of stuff near dark when I need to see my reticle, and I don't like trusting electronic illumination.

 

[eric1115]

What do people normally do for wind with SFP scopes?

Miss

 

[greyghostnw]

I wouldn’t over complicate this… scopes are personal. Depends on your style whats good. I used second focal NF nxs’s for load of years dont recall missing ever from wind calls. Knowing your system from putting reps in makes it natural like anything. I will say i definitely like the nx8’s better for parallax for my eyes and ffp I also like doing load dev and zeros at 20x so i can shoot small. 15 x the center cross covers a 3/8” dot i shoot at for all work at 100 and it fools your effort imop to see your potential… With saying that i usually hunt with my field of view according to distance to see a ways around animal to watch there path after if any… be careful if you buy the 2.5 nx8 for its limited mounting position for and aft, good luck.

 

[Dfou]

New rifle came in 6.5 PRC 24” Barrel. I’ve been trying to read through the suppressor threads to figure out what would be good for him but I’m getting lost in all the info. Lookin for recommendations for a good suppressor for this rifle

 

[spdrman]

New rifle came in 6.5 PRC 24” Barrel. I’ve been trying to read through the suppressor threads to figure out what would be good for him but I’m getting lost in all the info. Lookin for recommendations for a good suppressor for this rifle

Wish it was easier to try them all, out of the 7 centerfire I have the 2 that aren’t ported or have a brake are the ones I use the least.

Suppression is obviously goal number one but being able to reduce recoil still is a big plus.

I really like my KGM R6.5’s on my 6.5 PRC’s those little ports don’t look like much but make a huge difference. R30 is even better but on the heavier side. The added volume makes a noticeable difference though and if you have a 30 cal you might want to put it on they work great.

My smith is rethreading omega anchor brakes to fit AB Raptors, I just picked that up 2 weeks ago and and it made my 300 prc fun to shoot again, it might end up on the 6.5 prc. He is pulling the end cap off the AB A10’s and installing that brake on those as well, I don’t think you could get a better suppressor for the price

Omega was kind of the baseline everything was compared too for years, they really aren’t a bad can and the price is better than most, I don’t own one but have been around several

If I was to buy a new one today I’d look at the unkown reaper with a brake, only downside I see to that is the need to time the can to the barrel, not a huge deal if you don’t plan on swapping it around on guns. Would be nice to see a radial brake option for the reaper down the road to make it easier to swap around on guns for the guys that don’t have multiple suppressors.

Scythe TI checked all the boxes but the scythe failure thread worried me and it’s just going to live on my 260

KGM R6.5, AB raptor 8 with anchor brake, ultra7

 

[Q_Sertorius]

New rifle came in 6.5 PRC 24” Barrel. I’ve been trying to read through the suppressor threads to figure out what would be good for him but I’m getting lost in all the info. Lookin for recommendations for a good suppressor for this rifle

On a 24” barrel in 6.5mm, I recommend checking out the Airlock ZG 6.5 and the US OG 6.5. I’ve used them each on 24” barrels and find they work well. I much prefer them to 6” options on a barrel that long.

 

[Dfou]

On a 24” barrel in 6.5mm, I recommend checking out the Airlock ZG 6.5 and the US OG 6.5. I’ve used them each on 24” barrels and find they work well. I much prefer them to 6” options on a barrel that long.

Did I read that the OG was louder than advertised? I read quite a bit so I may be thinking of a different one people were complaining about

 

[spdrman]

On a 24” barrel in 6.5mm, I recommend checking out the Airlock ZG 6.5 and the US OG 6.5. I’ve used them each on 24” barrels and find they work well. I much prefer them to 6” options on a barrel that long.

I take back everything I said and agree with Q_Sertorius

Everything I have the barrels are 18-20” and in folding chassis’s. After my first season packing my Tbac7 around the woods on a 26” barrel and traditional stock I said I’d never do that again and chopped all my barrels down after that season

 

[Q_Sertorius]

Did I read that the OG was louder than advertised? I read quite a bit so I may be thinking of a different one people were complaining about

The OG is louder than the OG 6.5. They aren’t the same can. The OG is not louder than advertised (it was advertised at 133 dbA), but it just isn’t a very quiet suppressor. The OG 6.5 is a much better product (unless you need a can for a larger caliber).

 

[Dfou]

The OG is louder than the OG 6.5. They aren’t the same can. The OG is not louder than advertised (it was advertised at 133 dbA), but it just isn’t a very quiet suppressor. The OG 6.5 is a much better product (unless you need a can for a larger caliber).

Thanks for clearing that up for me. I’m gonna need one for this rifle (6.5) and one to swap between a 7-08 and a 300 WM

 

[spdrman]

My buddy was just approved for his 6.5OG on Monday. Excited to go try it out, my boy is getting a Gen 2 T3x 6.5 prc for Christmas. Debating cutting it too 20” or getting him the 6.5 OG and leaving it at the factory 22” length. I’ll make the call once I have the chance to get to the range with him

 

[spdrman]

Thanks for clearing that up for me. I’m gonna need one for this rifle (6.5) and one to swap between a 7-08 and a 300 WM

Listening to the podcast about the 6.5 as long as your 7-08 is theades straight they say you can shoot it in the 6.5 OG, they just said check it first with a rod.

300wm I’d look for something with some sort of brake or port. My 300 prc sat the last 2 years until I just got that brake on the raptor. My kids enjoy shooting it now it tamed it so much

 

[Q_Sertorius]

Thanks for clearing that up for me. I’m gonna need one for this rifle (6.5) and one to swap between a 7-08 and a 300 WM

I would not get an OG for a 300 WM. I’d look at using a 6”+ suppressor, like a Reaper, Nomad, AB Raptor 8/10, etc. for that cartridge. Or maybe… wait and see how the Airlock ZG 30 does when it comes out.

 

[Pilsner]

This is not me kidding but being serious.

Lot of data coming out about concussive blasts with firearms causing cte. I would be very careful with having a kid whose brain is still forming shooting a big boomer. Especially with a muzzle brake.

I would suppress it at the very least, and consider a smaller caliber until he is an adult.

My informed opinion.

I can not over emphasis this enough! The damage that your brain takes today from muzzle blasts is brain damage tomorrow.
If you are dumb enough to think that muzzle breaks don't equal brain damage, then I can't help you. Just know that with each loud noise/muzzle blast that you endure that you are losing IQ points.
-Doc

 

[Dfou]

I can not over emphasis this enough! The damage that your brain takes today from muzzle blasts is brain damage tomorrow.
If you are dumb enough to think that muzzle breaks don't equal brain damage, then I can't help you. Just know that with each loud noise/muzzle blast that you endure that you are losing IQ points.
-Doc

I literally just asked for recommendations on suppressors. No one is talking about brakes or arguing about if they cause brain damage.
Now muzzle breaks are a totally different topic

 

[eric1115]

I can not over emphasis this enough! The damage that your brain takes today from muzzle blasts is brain damage tomorrow.
If you are dumb enough to think that muzzle breaks don't equal brain damage, then I can't help you. Just know that with each loud noise/muzzle blast that you endure that you are losing IQ points.
-Doc

Not dumb. Ignorant. There's a difference. I agree that the data appears to support the position that muzzle brakes do contribute to brain damage, and I'm in the "no more brakes, probably ever" camp, but it's definitely not widely known or obvious that it definitely causes brain damage.

Also, it would be a good idea to spell "brake" correctly if you want to call out others' declining intelligence.

 

[eric1115]

New rifle came in 6.5 PRC 24” Barrel. I’ve been trying to read through the suppressor threads to figure out what would be good for him but I’m getting lost in all the info. Lookin for recommendations for a good suppressor for this rifle

I am super pleased with my AB Raptors, but if I were buying today for a 6.5mm bore (especially with a long barrel) I'd be looking at the Airlock or the Unknown OG6.5 as mentioned by Q. Reflex (OTB) is legit performance gain without added length.