Which broadhead are you guys using?

Beendare

WKR
Joined
May 6, 2014
Messages
8,996
Location
Corripe cervisiam
Several people have said something to the effect that zwickey’s have killed more animals than whatever. My question is, do you think that animals have been lost due to being broken/ bent/ performance failure, whereas a more expensive/ better built broadhead would’ve killed done the job?
Nope

IMO, Much of the claims of ‘BH Fails’ on archery forums is just plain bad shot placement.

An example; Many years ago I shot a big black bear that turned toward me as I was letting the shot go…the arrow hit him square on the heavy part of the front shoulder penetrating maybe 2” then falling out. That was a first for me in well over 200 critters I’ve shot with an arrow.

Some would argue that an 800g arrow with a tempered steel 2 blade would have penetrated that big bear. Maybe…but then using a stupid heavy arrow like that on all my hunts would have resulted in many more poor shot placements and worse- misses.

I’ve tested a whole range of arrows, BHs and arrow weights and my conclusion; trajectory and accuracy matters- a lot.

The saving grace; Slap a 2 blade BH on ANY arrow with good arrow flight and its a penetrating monster
 

wyodog

Lil-Rokslider
Joined
May 17, 2016
Messages
186
Location
Wyoming
I've shot more than a few animals with Zwickey Eskimo's. Mostly glue on heads on cedar arrows. I had good success with them. I now like single bevel broadheads but i am not sure if they are really that much better or if it is in my head. Mostly I my broadheads to be sharp, hit where im looking and tough enough to do the job.
 
Joined
Oct 7, 2023
Messages
67
My preferred broadhead is the Eclipse 145 with bleeder, makes it 153+/-, I take the bleeders out for moose. Any well made broadhead will get it done, if it fly‘s good.
My belief: Most people would be better off spending the time spend worrying about their broadhead, practicing putting the arrow where it needs to go.
Hopefully you have a bunch of them. I don’t think the 4-blade Eclipse has been made in many years. (Or, tell me where to buy them!)
 
OP
Mtwood24

Mtwood24

Lil-Rokslider
Joined
Mar 14, 2020
Messages
261
Location
Montana
I bought some bear razor head single bevel for now. I can’t wait to test them out!
 
Joined
Sep 7, 2018
Messages
12
Location
Virginia
I just started hunting with a recurve and went with a tuffhead. Was really tempted to stick with regular old muzzys for a while but decided to go with something heavier. I'm anxious to see how they perform.
 

mobohunter

Lil-Rokslider
Joined
Mar 29, 2024
Messages
110
Location
HTX
Cutthroats definitely are worth it. I've buried them a foot into gravel with a compound and it still spun dead nuts
I've had the same experience, but really terrible blood trails... dead animals but can be tough to find
 
Joined
Feb 18, 2013
Messages
1,287
Location
Texas
I just switched to QAD Exodus heads. And yes, I know I'm in the trad forum. They're a solid design, and the tip can be sharpened up as well as the blades. I like them because they're quiet in flight, a solid 1 1/4" 3 blade, and come in 125 gr
 

SliverShooter

Lil-Rokslider
Joined
Jul 30, 2018
Messages
220
Location
Bozeman, Montana
Hopefully you have a bunch of them. I don’t think the 4-blade Eclipse has been made in many years. (Or, tell me where to buy them!)

I have known Blake of Eclipse before him and Brad bought the Journeyman equipment and started Eclipse. When I found out he stopped making the 4-blade, I called him and convinced him to do another run and make me enough 4 blades to last me the rest of my life. Also bought a hundred extra bleeder blades.
They still make the 145 grain without the bleeder slots. You can use a Dremel tool to cut your own slots and use bleeder blades from other manufactures like Bear.
 

Geytre88

FNG
Joined
May 25, 2024
Messages
15
Iron wills are absolutely worth it if you can justify the price of admission. That being said my experience is taking two whitetails with a 125 SB. First was one lung, he went ~200 yards and didnt bleed much with the nature of the hit. Second was a frontal and he walked in about a 40-50 yards circle and just expired while walking. Neither deer reacted like they knew what hit them and just walked off. Internal damage was significant.
 

Scout01

FNG
Joined
Jul 1, 2024
Messages
11
Location
WA
Kudu. First shot 35 yards, lungs. Second shot 65 yards, lungs. Both clean pass through and both went through ribs. He was dead on the hoof before he knew what happened.
 

Attachments

  • IMG_5642.jpeg
    IMG_5642.jpeg
    332.7 KB · Views: 19
  • IMG_5643.jpeg
    IMG_5643.jpeg
    318.5 KB · Views: 19

plentycoupe

Lil-Rokslider
Joined
Jan 1, 2013
Messages
267
My choice now is the Day 6 150grn with bleeders for my Wengerd and the Day 6 200grn with bleeders for my Satori. Have used a few and the cool thing about these are they are tough.
The one below missed a turkey, skipped off a road and dead ended into a boulder. I resharpened it and killed a 276lbs black bear with it. Zwickeys have killed more animals than who knows, yet they cant take that abuse and are certainly more of a pain to sharpen.
I used Magnus glue on with cedar arrows when I started. I will admit I got these broadheads for a hell of a deal, but they are tough and do not rust quickly like the Iron Wills. I have some of those too.
IMG_0362.jpg
 
Joined
Aug 7, 2024
Messages
34
Ive been using grim reaper mechanicals or bloodsport grave diggers. The grave diggers are brutal on groundhogs
 
Top