What did you do in the reloading room today?

[coya]

Just moved into my new rental and stocked up the shelving

 

[Matt5266]

Feeling pretty American right now. Trying to get 100 cases of 243 loaded up with 107 TMK. Happy 4th! Thank you all that have ever served this country!

 

[tstowater]

Loaded some 223 with 77 TMK and 243 with 107 TMK. Slightly adjusted Form's 223 load as I went to 2.33 instead of 2.26. I adjusted the 243's to 2.933 instead of the 2.941. Probably going to lengthen both some the next time.

 

[Slick8]

Just finished fire forming 100 rounds of lapua brass to 300 NM Imp.

Prepped and primed, ready for a ladder test.

Also been playing with some 6.5 manbun, a parts gun that I finished earlier this year.

Pictured below is a before and after for the 300 NM Imp with 245 EOLs and a six-five manbun for comparison.

 

[Austin Kaufman]

Been shooting a whole lot, sat down and sized 500 pieces of 223 today and loaded up 150 of them. Hoping to get the rest loaded the next few evenings.


Sent from my iPhone using Tapatalk

 

[Sinistram]

Just finished fire forming 100 rounds of lapua brass to 300 NM Imp.

That's a real monster there! What kind of velocity do you get with those 245s?

 

[Gstallings]

Loaded for a PRS match coming up.

 

[HandgunHTR]

This was yesterday, but I think it still counts.

Loaded up 50 fire-forming rounds for my new to me 30-30AI Contender barrel. The frame should be at my FFL on Wednesday and the new grips will be here tomorrow.

I need to figure out which can to put on it. You would not believe the looks you get at the range when you show up with a 12-14" barrelled Contender with a can on it. It gets even better when you consistently hit the 6" gong at the 300 yard range.

 

[Slick8]

Not sure yet, anything over 2800 will work for me.

I ran it to 2850 with H1k while fire forming at 84 grains.

Going to run a ladder next week with N568.

 

[TradLife406]

Cleaned the room. My gun room looks like Forms trailer. Probably worse same with my bench.

Also took my kids Savage Rascal and gave it the Rokslide treatment. Found some firm form and built up the cheek rest for him. With the dot on a rail it sits up really high. Yesterday he was having a hard time keeping his face on the gun. Then skate taped the forend sides for him.

Haha UM should make a mini rokstok for this gun with spacers

 

[Decker9]

Loaded up a bunch for the 6gt for this weekends blackjack shoot. Alpha brass br4 primers 34gr target and 109gr bergers.

Had to break out some old brass that needed trimming. One day I’ll upgrade my system

 

[PC356]

Decent little 6 ARC load for the 18” Tikka. 95 TMK, Virgin Starline/BR4, 1.670 CBTO, 2.255 COAL.
28.2 grains Benchmark. 6 ARC vs 6 NSI for reference .

 

[ridgeline]

Ok, so it wasn't today but it was a "today" at some point. For giggles I decided to neck down virgin ADI/OSA 308 Win brass into 6 CM. Simple enough process, however neck turning always sucks !



Grabbed a random mild load, zero load development though I had me a hunch all will be good.



The fist three. I shot prone with Tricer bipod and rear bag. This rifle hammers with Barnes 112 Match burners so I did not adjust its zero and sent the rest at 700 meter steel...



The Rile !!

 

[waspocrew]

No rounds loaded today, but figured this counts since I was in the reloading room haha.

I fired off about 700 rounds of 223 through my AR recently (with about 250 of those being suppressed with an OG6s). Man, that rifle was nasty! Broke down the bolt carrier group and ran it through the ultrasonic for a while. Healthy wipe down with CLP and reassembled. Mounted a new Athlon Ares LPVO and a Magpul PRS lite.

Should be fun to get back out. I’ve been trying to make a dent in the p dogs at the family ranch. My tally for the year is 860. Goal is 1k.