What did you do in the reloading room today?

[49ereric]

Swaged and loaded 50 223 mixed cases. 50 grain Speer TNT, W748, Rem 7 1/2
Cold front currently so might be a spell before I shoot.

 

[Mule3006Elk]

Bought Lapua brass for 300 WM.
In process of cleaning my gun. Switched bullets so I like to have a clean barrel from baseline.
Picked up a Forster Deluxe case for my bullet seaters (perfect).
Picked up Redding Application Media. Much better than dipping the necks or bullets in the dry lube itself.

 

[Sinistram]

Picked up Redding Application Media. Much better than dipping the necks or bullets in the dry lube itself.

I use and like that stuff, too. Just make sure you don't spill it!

 

[Mule3006Elk]

Cold front currently so might be a spell before I shoot.

Bad weather = reloading

 

[49ereric]

Bad weather = reloading

Hundreds off 223 mixed cases to swage starting soon.

 

[hoooogan]

De-primed and wet tumbled a crap ton of new-to-me 1x Lapua 6.5CM brass. Getting ready to load up a fresh ladder of 127gr LRX for this weekend, along with the remaining 44pcs of 145gr Match Burners for plinking.

I switched to a TRX-925 scale and my one small batch of 129ABLR loads were heavy for the same velocity. I've loaded ~150 of these with the old scale and velocity was constant. Now I'm needing an extra ~0.8gr. But on a good note, that known velocity produced the same accuracy. Need to recheck basically everything now.

 

[MD97756]

Loaded more .308 with varget

 

[Mule3006Elk]

Gun is mostly cleaned. Carbon gone. Copper gone. I placed a mop saturated with Bore Tech C4 Carbon Remover in the area where Carbon rings might form. I don't have a bore scope. More to be complete and it takes very little time. O/w I rarely clean this gun unless accuracy drops.

Tonight I'll load 30-06 175 grain Terminal Ascent, Lapua, Winchester LR, H4831SC. Brass is already prepped. Just last week, I hooked up an old webcam to my laptop to view the beam scale. Older eyes LOL. Truth be told, even when my eyes were perfect I should have done it sooner. So much easier and faster IMO.

Hopefully, hit the range in the next 1-2 weeks, let the barrel settle. Shoots 3/4" with a dirty/fouled barrel. Test case to see if this load shoots better clean, dirty, and how many rounds to settle in.
Then, off to BLM land to do Kestrel velocity verification. Should set up nicely for field training practice and hunting season.

 

[waspocrew]

Loaded up 88 ELDMs and RL-23 for my 22 Creed. This combo has worked well in my other two, so should hopefully be a winner again. Gotta wait for this damn wind to die down first

 

[Castle Rock]

Don’t let the wind put you off, you can tell if it is going to work

 

[Austin Kaufman]

Just got some dies for my 6mm arc, so I loaded 3 different loads for that gun with 108s. Then I loaded another 100 223 trainer rounds with 73 ELDMs. Also prepped and primed 150 more pieces of 223 brass.


Sent from my iPhone using Tapatalk

 

[sierracharlie338]

Just got some dies for my 6mm arc, so I loaded 3 different loads for that gun with 108s. Then I loaded another 100 223 trainer rounds with 73 ELDMs. Also prepped and primed 150 more pieces of 223 brass.


Sent from my iPhone using Tapatalk

Nice set up

 

[Austin Kaufman]

Nice set up

Thanks!


Sent from my iPhone using Tapatalk

 

[TSnave]

Midway was running a sale on factory second 6mm 107's so I picked up 400 of those to use in fire forming loads. Today I'm planning on annealing a bunch of Grendel cases, to be topped with the 107's and H335.

 

[MD97756]

Figured out my rail was loosening up. Now to begin the reloading process on the .308 again

 

[UnckleBob]

I loaded 50 rounds of 6 mm 105g Midway Seconds for 6 ARC.

 

[Frozenlead]

Gun is mostly cleaned. Carbon gone. Copper gone. I placed a mop saturated with Bore Tech C4 Carbon Remover in the area where Carbon rings might form. I don't have a bore scope. More to be complete and it takes very little time. O/w I rarely clean this gun unless accuracy drops.

Tonight I'll load 30-06 175 grain Terminal Ascent, Lapua, Winchester LR, H4831SC. Brass is already prepped. Just last week, I hooked up an old webcam to my laptop to view the beam scale. Older eyes LOL. Truth be told, even when my eyes were perfect I should have done it sooner. So much easier and faster IMO.

Hopefully, hit the range in the next 1-2 weeks, let the barrel settle. Shoots 3/4" with a dirty/fouled barrel. Test case to see if this load shoots better clean, dirty, and how many rounds to settle in.
Then, off to BLM land to do Kestrel velocity verification. Should set up nicely for field training practice and hunting season.

. Glad to hear I’m not the only one. I prop my phone up so I don’t need to hunch down to get an accurate view of my scale.

 

[ironworker378]

Sized, trimmed, and primed 100 cases of 22 Creed. Going to be loading the 69 gr Blitzking for thermal hunting this winter.

What is your load?

 

[waspocrew]

What is your load?

Working with RL-23. Did a quick pressure test recently and going to shoot groups tomorrow (assuming weather is ok). I’ll let you know what I settle on.

 

[Sinistram]

This morning's task was to lightly prep and prime 50 new Norma 22-250 cases to receive a fireforming load later today. There are hundreds more, but I'm tackling them in small chunks.