What arrow shafts

SethH

Lil-Rokslider
Joined
May 27, 2014
Messages
114
What shafts are all you elk hunters shooting? I have 29" draw with a draw weight of 65lbs. What are your thoughts?
 

ltlacorn

FNG
Joined
Aug 25, 2013
Messages
93
Location
Green Bay
What grains per inch are those.

Here is a little info on them. I buy bare shafts, spine test them and fletch with cock vane down the spine using 1 jig. Unbelievable arrow.

The name says it all, this incredibly light and strong micro-diameter shaft was developed using cutting-edge carbon manufacturing techniques. This micro diameter shaft also utilizes fine tuned spine-to-weight ratios to maximize speed, kinetic energy, penetration, and provides the flattest trajectory possible. This shafts micro-diameter technology virtually eliminates all cross-wind drift. These characteristics combine to produce an extremely durable and accurate hunting or target arrow. This micro-diameter shaft is manufactured with the lowest tolerances to provide the down-range accuracy required in a championship-level target shaft. Go deep and make an impact!

Deep Impact shafts will come with:
• Bohning F-nocks (White or Black)
Required - Outserts, Vanes and Points
Don't forget extra components.

Not sure what size is right for you. Check out our sizing chart.

• Straightness: ± 0.001" max.
• Straightness: ± 0.003" max.
• Weight tolerance: ± .5 grains

Spine Inner Diameter Outer Diameter GPI
300 .165" .248" 11
350 .165" .240" 9.6
400 .165" .233" 8.6
450 .165" .236" 7.9
500 .165" .228" 7.6
600 .165" .223" 7
 

miller1

Lil-Rokslider
Joined
Feb 26, 2012
Messages
240
Location
Michigan
I am using Axis 300 @28.5" long with 2" blazers, 50 brass inserts and a 100 grain. Wacem broadhead, 490 grains total.
 
Joined
Apr 18, 2013
Messages
21
Location
WI
I'm shooting 430 grain Gold Tip Velocity XTs. Only 55 pounds, 29.675 draw, QAD Exodus broadheads, and 42gr inserts. I love Gold Tip arrows, for some reason I shoot them better than any others I have tried.
 
Joined
Jun 9, 2014
Messages
72
Using Easton Axis 340's @ 27.5 shaft length with a 125grain Qad Exodus or Magnus Stinger and Blazer vanes. They are weighing in at 445 grns.

Getting 280 fps out of a Prime Alloy @ 70# draw and 27.5 draw length.
 
Last edited:
Joined
May 22, 2013
Messages
712
Location
Western CO
Huge fan of the Black Eagle Outlaws with the brass insert. They're not a small diameter shaft but priced at $68 per dozen. Very tough arrow. You'll be looking at a mid 400gr arrow with your setup.
 

ahlgringo

WKR
Joined
Mar 27, 2014
Messages
1,034
Vap V1 300, cut to 30" with penetrator 2 insert/outsert. Shuttle t 100, blazers. 444g. 29.5 " draw 70 lb elite energy 35. 291-293fps
 
Top