Welcome Exterra (and shoot for Scope Rings)

[bullmtn]

Here is my humble submission. 22 arc using the painless load development method that I learned here. 100yds seekins nx15 prone suppressed with a swfa 6 power

 

[chutinlead]

How long till the drawing? The weather turned to crap here and kind of killed my plans to get out and shoot.

 

[Exterra]

How long till the drawing? The weather turned to crap here and kind of killed my plans to get out and shoot.

There is no set time frame, more of a participation level. We understand that it is the middle of winter and it may be difficult for some people to get out and shoot. We want to make sure everyone has a chance to participate. There are enough of our targets out there to have over 50 entries by now, so you are not the only one having trouble getting out to shoot.

I've been waiting all week for the weather to clear up, so that I can shoot. I don't mind shooting with some wind but 70 mph gusts are a bit much for load development.

 

[Q_Sertorius]

I used the target while testing a new factory load for my Sauer 100 in 6.5 CM. This was the Fiocchi 129-grain SP. Clearly it is not the right ammunition for this rifle.

 

[Exterra]

There is no set time frame, more of a participation level. We understand that it is the middle of winter and it may be difficult for some people to get out and shoot. We want to make sure everyone has a chance to participate. There are enough of our targets out there to have over 50 entries by now, so you are not the only one having trouble getting out to shoot.

I've been waiting all week for the weather to clear up, so that I can shoot. I don't mind shooting with some wind but 70 mph gusts are a bit much for load developmen

Here is my humble submission. 22 arc using the painless load development method that I learned here. 100yds seekins nx15 prone suppressed with a swfa 6 power View attachment 1024588

Thanks for posting the target. What load did you settle on for your 22 ARC?
Good luck in the drawing

 

[bullmtn]

Thanks for posting the target. What load did you settle on for your 22 ARC?
Good luck in the drawing

Near max CFE 223 and 62 vld-et with once fired Remington range brass, supposedly the powder is picky, but that group is a REALLY good group for my shooting ability.

 

[Exterra]

Near max CFE 223 and 62 vld-et with once fired Remington range brass, supposedly the powder is picky, but that group is a REALLY good group for my shooting ability.

Thanks for the 22 ARC info. Nice shooting

 

[Exterra]

I used the target while testing a new factory load for my Sauer 100 in 6.5 CM. This was the Fiocchi 129-grain SP. Clearly it is not the right ammunition for this rifle.

Thanks for posting your target. Good luck in the drawing

 

[Q_Sertorius]

Thanks for posting your target. Good luck in the drawing

I’ll print another one and try to get you a prettier group next time I’m at the range.

 

[huntinfool84]

Got out to shoot today. 223 shooting 73gr ELDM, 100 yard 16 round group, should have been 20 but some dumbass didn’t reset the turret from the last time he was shooting at 600 yards so the first 4 were high….

 

[huntinfool84]

Second gun is 6.5 creed, 147 ELDM, 100 yards, 200 yard zero, 17 round group. 5 rounds with Reaper, 5 with Scythe, 5 with Omega. Then 1 with the Reaper and 1 with the Scythe with no muffs to hear the difference.

 

[Exterra]

Got out to shoot today. 223 shooting 73gr ELDM, 100 yard 16 round group, should have been 20 but some dumbass didn’t reset the turret from the last time he was shooting at 600 yards so the first 4 were high….

Thanks for posting your targets. Good luck in the drawing

 

[sndmn11]

I'm in!
I caught the flyer before it happened.

 

[sndmn11]

Same Tikka action and stock as above, swapped barrel.




My actual hunting rifle

 

[Exterra]

Second gun is 6.5 creed, 147 ELDM, 100 yards, 200 yard zero, 17 round group. 5 rounds with Reaper, 5 with Scythe, 5 with Omega. Then 1 with the Reaper and 1 with the Scythe with no muffs to hear the difference. POI shift did you see between the three?

I'm in!
I caught the flyer before it happened.
View attachment 1027247View attachment 1027248View attachment 1027249

Thanks for posting your targets. Good catch on the messed up bullet. I'm surprised that it made it to out into the world looking like that.

 

[sndmn11]

Thanks for posting your targets. Good catch on the messed up bullet. I'm surprised that it made it to out into the world looking like that.

Midway 2nds!

 

[Exterra]

Same Tikka action and stock as above, swapped barrel.

View attachment 1027285
View attachment 1027282

My actual hunting rifle
View attachment 1027284
View attachment 1027283

What load are you shooting with the 6mm Creed?

 

[sndmn11]

What load are you shooting with the 6mm Creed?

I'd have to look up the specifics. I know it's alpha lrp, Staball 6.5, and hornady 105bthp to mimic the 106tap. It's probably around 43grs.