Welcome Exterra (and shoot for Scope Rings)

[robby denning]

Hey you Roksliders. Please welcome our new advertiser, Exterra Precision:

Exterra Precision was formed by a group of Idaho hunters with decades of experience testing, engineering and manufacturing products for the shooting sports. As backcountry hunters based in Idaho we understand the need for reliable precision-made gear. Our goal is to provide our fellow hunters with gear that helps them excel in the mountains and on the range. See all we offer here.

They are doing a cool giveaway on their scope rings. But you actually have to shoot your gun to win (I know, cry me a river). Here's how you get in:

We are going to give away a set of our one piece direct mount rings (see our rings here).
To enter

1) subscribe to our email list at Contact Us (lower left at Subscribe to our emails)
2) We will send Exterra .pdf target to shoot a 10-shot group on
3) Just post a pic of your group in this thread to get entered.

Winner to be chosen at random from guys who post up that pic

@Ryan Avery

 

[Fred@Exterra]

Thanks for the introduction. It’s exciting to see our products coming to market… especially since they are simply products that we designed for our own hunting rifles.

The scope rings started out eight years ago because I couldn’t find a set of rings for my new Tikka that I liked… seemed redundant to add a pic rail to a rail and then stack rings on top of that… to many potential points of failure.

Since I had mountains of 7075 aluminum from other products we build, pretty soon I was building them for all my rifles & my buddies.

Here’s a quick video of how the rings work on a Tikka & show the 17-4 screws and locking pins.

https://fb.watch/F7F20Fsi

Please feel free to reach out to me (Fred@Exterra) or Vince (Exterra) if you have any questions.

Fred
ExterraPrecision.com


Sent from my iPhone using Tapatalk

 

[mtnwrunner]

Welcome!

Randy

 

[Justin Crossley]

Thanks for the introduction. It’s exciting to see our products coming to market… especially since they are simply products that we designed for our own hunting rifles.

The scope rings started out eight years ago because I couldn’t find a set of rings for my new Tikka that I liked… seemed redundant to add a pic rail to a rail and then stack rings on top of that… to many potential points of failure.

Since I had mountains of 7075 aluminum from other products we build, pretty soon I was building them for all my rifles & my buddies.

Here’s a quick video of how the rings work on a Tikka & show the 17-4 screws and locking pins.

https://fb.watch/F7F20Fsi

Please feel free to reach out to me (Fred@Exterra) or Vince (Exterra) if you have any questions.

Fred
ExterraPrecision.com


Sent from my iPhone using Tapatalk

Welcome! The video isn't displaying.

Is there a recoil lug or pin for the Tikka scope mounts?

 

[Fred@Exterra]

Welcome! The video isn't displaying.

Is there a recoil lug or pin for the Tikka scope mounts?

Thanks Justin, there are two 17-4 recoil pins that go into the factory provided holes on the top of the Tikka receiver. These pins, working in conjunction with the custom 17-4 shoulder screws, put the maximum amount of hardened steel in the shear area of the mounting system. Because this is a one piece mount, the four shoulder screws and two recoil pins all work in concert to provide maximum alignment and shear strength.

I put an animation of how the system works up on YouTube.

Thanks for the welcome.

Fred


Sent from my iPhone using Tapatalk

 

[Ferrulewax]

@Fred@Exterra was kind enough to give me a prototype mount made for a T1x. Unfortunately I haven’t had a chance to get it mounted and test it yet. That said the mount itself is impressive, and the fit and finish is great. The integrated level is neat as well.

 

[BAKPAKR]

Thanks for the introduction. It’s exciting to see our products coming to market… especially since they are simply products that we designed for our own hunting rifles.

The scope rings started out eight years ago because I couldn’t find a set of rings for my new Tikka that I liked… seemed redundant to add a pic rail to a rail and then stack rings on top of that… to many potential points of failure.

Since I had mountains of 7075 aluminum from other products we build, pretty soon I was building them for all my rifles & my buddies.

Here’s a quick video of how the rings work on a Tikka & show the 17-4 screws and locking pins.

https://fb.watch/F7F20Fsi

Please feel free to reach out to me (Fred@Exterra) or Vince (Exterra) if you have any questions.

Fred
ExterraPrecision.com


Sent from my iPhone using Tapatalk

Welcome to Rokslide.

That is a great looking mount! Any plans to just make a Tikka pic rail mount with the locking pins?

 

[Fred@Exterra]

@Fred@Exterra was kind enough to give me a prototype mount made for a T1x. Unfortunately I haven’t had a chance to get it mounted and test it yet. That said the mount itself is impressive, and the fit and finish is great. The integrated level is neat as well.

Thank you… except I just realized that your T1X proto looked way nicer than the T1X proto on my rifle… I need to re-evaluate my business plan

Sent from my iPhone using Tapatalk

 

[Fred@Exterra]

Welcome to Rokslide.

That is a great looking mount! Any plans to just make a Tikka pic rail mount with the locking pins?

We could absolutely look at that… but to be honest, I absolutely loathe machining picatinny rails… I’d hate to think how many miles and miles of picatinny slots I’ve machined in my life…

On my rifles I want the fewest points of failure possible. Adding a rail & then a clamp on ring works (especially if you bond the rail to the action), but it offers a couple more points of failure and unnecessary weight.

The downside with the one piece, direct mount is that it makes it more difficult to move scopes from rifle to rifle & you sacrifice a bit of latitude on scope location front to back.


Sent from my iPhone using Tapatalk

 

[BAKPAKR]

The downside with the one piece, direct mount is that …. & you sacrifice a bit of latitude on scope location front to back.


Sent from my iPhone using Tapatalk

^^This^^

I was specifically thinking about scopes with relatively short mounting areas and short eye relief.

Edit - SRS makes a Tikka pic rail with a pin but I like the way you executed the pins better.

 

[Fred@Exterra]

^^This^^

I was specifically thinking about scopes with relatively short mounting areas and short eye relief.

Edit - SRS makes a Tikka pic rail with a pin but I like the way you executed the pins better.

SRS makes some good stuff, I like their products. If you have a scope with short eye relief or funky tube geometry, I’d be happy to send out a mount once we get caught up for you try out. Our mount should save you a couple ounces compared to a lot of options out there.

Sent from my iPhone using Tapatalk

 

[Exterra]

Thanks for the welcome. We are excited to be Rokslides newest sponsor member.

Just a heads up on the Shooting for Rings, when you subscribe to our email list you will receive an automated response with a discount code. I will follow up with another email that has the Exterra pdf target attached, I'll try to get it out right away but it could be a couple of hours before you receive it . I If you don't see the target email be sure to check your spam, it ended up there on a couple of the test runs.

You don't have to shoot well to enter, but you do have to shoot and post your target in this thread. I'll be shooting in the morning and posting up my targets. (obviously I won't be entered in the drawing).

Good luck in the drawing
Vince
Exterra Precision

 

[Justin Crossley]

Thanks Justin, there are two 17-4 recoil pins that go into the factory provided holes on the top of the Tikka receiver. These pins, working in conjunction with the custom 17-4 shoulder screws, put the maximum amount of hardened steel in the shear area of the mounting system. Because this is a one piece mount, the four shoulder screws and two recoil pins all work in concert to provide maximum alignment and shear strength.

I put an animation of how the system works up on YouTube.

Thanks for the welcome.

Fred


Sent from my iPhone using Tapatalk

That looks really good.

 

[Gmr777]

Like the integrated offset bubble level option.