Walk-in cooler with cool bot materials

onlybrowning

Lil-Rokslider
Joined
Nov 27, 2023
Messages
292
Lots of good info here. You don’t need a Cool Bot. I did the same thing as this guy and works great.



Sent from my iPhone using Tapatalk
 
Joined
Apr 14, 2019
Messages
1,247
Location
Fort Myers , FL
Make sure you build it tall enough if you want to hang whole field dressed deer. Even with the rear leg shanks cut off they are surprising tall with their heads and racks still on.
 
Joined
Feb 12, 2024
Messages
42
if you don’t need a permanent location, the Koolabuck is pretty solid and a complete package. You can get it up and running in about 15 minutes and holds temps below 40 even in 80+ degrees and direct sunlight (like the buck I had hanging last week).

And at the end of the season it packs down pretty small where my wife barely notices it. I have the Jr. model.

 
Joined
Sep 13, 2016
Messages
2,397
Location
Idaho
I built one in my shop that is 4x8x8. I framed the walls with 2x4's and used fiberglass insulation in between the studs and a vapor barrier on the inside wall. On both sides of the walls, I used 2" poly styrene panels and covered with 5/16" osb. I used a 12k btu with a Ranco temp controller.
 
Top