Vpa 150 gr help!

[Justin.Medcalf]

Ok guys need your help. I bare shafted my bow with 145gr field points and it is nuts on out to 75 yds. I just bought some 150 gr vpa unvented three blades and shot em with a group of field points. Problem is they are grouping 8 inches low from 25 to 55 yds. I was expecting a little differance from field points but not 8 inches! I was shooting 125 gr magnus buzzcuts but wanted a three blade coc head. I also use a hha single pin slider so i cant just change my pins. Any help or suggestions would be appreciated!

 

[brandon.andersen]

Bump your rest up 1/64 and shoot again.

Sent from my SM-G930T using Tapatalk

 

[Beendare]

Yeah, I shoot those heads. Its probably just a tiny adjustment to get them dead on assuming the arrow is assembled and spinning perfectly.

 

[SKYNET KC]

Agree with the above. Tip that rest up JUST A HAIR and see what happens.

 

[Justin.Medcalf]

Ok thanks guys! I will try again tonight after a little rest adjustment. Thanks a bunch for the help.