Vortex Razor LHT Unintentional drop test

[hoooogan]

Curious to see your results of remounting. That much zero shift feels like the mounting system moved. You hit the front of the scope, so maybe it got pushed back?

I'd also be curious to see what the scope body looks like. Roll it on a couple 2x4 (or similar) to see if the center is still concentric with the bells.

 

[ResearchinStuff]

check carefully to make sure those rings did not crack in the clamp area.

 

[MagnumHntr]

Do you have the bedding insert and your hnt26 bedded?

 

[207North]

Do you have the bedding insert and your hnt26 bedded?

Negative on that.

 

[207North]

I ran out real quick and checked a few things. There is no evidence of damage to the rings, or indication that the scope slipped. The chassis took a pretty good hit.




I did a quick re-zero last night. Again disregard group size, these were shot kneeling with a tripod.

Group #1 was double checking the quick zero.

Group #2 was shot after re-mounting the chassis.

Group #3 was shot after re mounting the scope rings to the rail.





There was a definite shift when re-mounting the rings. I could also feel the scope flex when loosening the fasteners and when re tightening. So something is up there.

 

[MagnumHntr]

Negative on that.

You might want to purchase one of these and have you action bedded in.

https://www.soldiermountainarms.com/product-page/sma-hnt-26-fix