I'm still pretty new to AR's, but the 2 screw holes for the detent ball arm/ gas key is where I bolted it strait onto. I'll try to post a pic when I'm home in a week. Very solid, pulls and pushes strait in line with the bcg
Ultralight Ultralight Rifles
- Thread starter Thegman
- Start date
SoFLBeachBum
FNG
- Joined
- Aug 16, 2025
- Messages
- 2
That’s well thought out, and that the bolt carrier rides smoothly is a plus. I read the earlier posts about issues with larger cartridges in the Solo, I wonder if your design solves that problem. And plus, it is super light and minimalist.
Thanks, I should know pretty soon as I test sticky undersized brass and NAS3 cases in the new ackley chamber as hot reloads. If I made the grip part of it a lot longer I could strike it with my palm to extract, I mean, it would still be a lot faster than a muzzleloader.
Edit: make that *oversize brass (for the ackley chamber/crush fit)
Found a neat trick.
Faxon barrel with integral flashhider machined in (they also have a brake option). 1# 5oz.
Obviously not ideal for can use. But saves some weight on a muzzle device and gives you a "14.5" barrel" without doing a pin and weld.
May not be ideal for "hunting". But Im putting together a car-15ish build. ~5#. But a2 sight and midlength gas. Truck gun. And maybe a meat packing gun in grizzly country. And a lot of fun/vibes in 3 gun type activities.
Faxon barrel with integral flashhider machined in (they also have a brake option). 1# 5oz.
Obviously not ideal for can use. But saves some weight on a muzzle device and gives you a "14.5" barrel" without doing a pin and weld.
May not be ideal for "hunting". But Im putting together a car-15ish build. ~5#. But a2 sight and midlength gas. Truck gun. And maybe a meat packing gun in grizzly country. And a lot of fun/vibes in 3 gun type activities.
yfarm
WKR
I use ospho as a rust converter/ primer before painting on steel. Has anyone every used it on a barrel as a surface finish?
Share more pics when it’s finished! I love retro ultralight builds. You may consider a slick side A1 upper to keep it even more simplistic if you’re a righty.
Clever grinding. I like it!
I have been working on this build for a few months and finally have the Lower ready to show. I was holding out for my upper to be complete but realize that the Lower might qualify as ULUL, but as a gasser, the upper will only be UL. The weights are from my scale and may vary from claimed weights.
With the issues of ordering the TN Arms lower this year, I decided to try the ROAM R-15 Magnesium Lower.
The build with the following parts, weighs out at 1 pound, 10 ounces. (More than one pound+ lighter than my two other builds!)
---So that's the Lower as it stands. Of course it could be lighter with a carbon fiber stock but that cost saving allowed me to go ahead and purchase the following for the upper.
More to come!
Cheers,
Brian
With the issues of ordering the TN Arms lower this year, I decided to try the ROAM R-15 Magnesium Lower.
The build with the following parts, weighs out at 1 pound, 10 ounces. (More than one pound+ lighter than my two other builds!)
- Lower Receiver: ROAM R-15 Magnesium. 5.5oz $300 (with this high cost item, I decided to go a bit more budget and compromise weight vs cost on some of the following parts.
- Stock: Mission First Tactical Battlelink Minimalist Stock. 5.7oz $20 Pawn Shop.
- Trigger: Geissele SSA-E X 2-Stage Trigger w/Lightning Bow. 2.4oz $240-on sale!
- Magazine release: V Seven Weapon Systems Ultra-Light, hard coat Anodized. .2oz $31.58
- Mag release Button: Strike Industries aluminum FDE $12.99 (the V Seven systems button is actually lighter but I wanted FDE)
- Bolt Catch: Battle Arms Dev. Enhanced, Investment Cast. .4oz $13.16
- Trigger Guard: B5 Systems Polymer. .2oz $7.50
- Grip Screw: Badger Ordnance Titanium. .1oz $10.99
- End Plate: Fortis Mfg. QD 6061-T6 Aluminum .3oz $8.99
- Castle Nut: Fortis Mfg. Aluminum. .2oz $12.89
- Safety: Strike Industries Flip Switch FDE .4oz $29.99 (this also comes with a cool round button to make it single sided but the weight is the same on my scale)
- Grip: Hogue 15 Degree Polymer. .4oz weighed $16.96
- Pivot and Takedown Pins: Strike Industries Ultra Light, Aircraft Aluminum. .2oz weighed $16.00
- Buffer Tube Kit: Geissele, Premium Mil Spec Buffer Tube assembly w Super 42 spring and H2 buffer $110.99
- -Buffer tube weight 3.7oz
- -Super 42 spring 1.6oz
- -buffer 3.2 oz w weight removed (not yet sure what the 6 ARC will need)
--I wanted to use my go-to Radian Talon safety but apparently it does not play nice with the SSA-E X trigger: Radian Talon-GI Single sided. .4oz $41.95 NOT COMPATIBLE W Geissele SSA-E X TRIGGER (wtf)
---So that's the Lower as it stands. Of course it could be lighter with a carbon fiber stock but that cost saving allowed me to go ahead and purchase the following for the upper.
- Bear Creek Arsenal side charging upper receiver in 6 ARC. $163
- Barrel: Faxon Gunner Profile 6mm ARC- 16" 1.57 pounds or 25.13oz $159.99
- Hand Guard: Odin Works Rune Free Float M-LOK 12.4" 8.7oz w Nut. $99.20
- Gas Tube: Spike's Tactical Melonited Mid-Length .73oz $12.96
- Gas Block: Faxon.750 1.12oz $22.99
More to come!
Cheers,
Brian
Attachments
I almost did.
But the math said the standard A1 was $130 and the A2 was $80
. I think the slick side was more. Primary arms is a dangerous website.I like the A2 sights better too.
The other issues is that its a middy barrel.
Im going to do an OG style handgaurd. But the carbine length handgaurds do look better.
UL 6mm ARC - Here is the nearly complete Roam lower with the BCA side charging upper and Faxon 16' barrel. It weighs in at 5 pounds 4.2 oz. This was my first time holding a rifle this light and I was quite surprised! It has some pretty light components as seen in the post above. (#4710) Below is a list of the upper parts. Now to find a SWFA Ultralight scope at 9.5oz....
Components of the upper:
I asked my gunsmith if he would drill a hole for the BCA charging handle in a lighter bolt carrier group and he said no.. I know that some of you have done that which seems like a great weight saver. The BCA bcg weighs 1 pound, 6.2oz. yikes.
Components of the upper:
- Bear Creek Arsenal side charging upper receiver in 6 ARC. 1 pound, 6.2oz! $163
- Barrel: Faxon Gunner Profile 6mm ARC- 16" 1.57 pounds or 25.13oz $159.99
- Hand Guard: Odin Works Rune Free Float M-LOK 12.4" 8.7oz w Nut. $99.20
- Gas Tube: Spike's Tactical Melonited Mid-Length .7oz $12.96
- Gas Block: Faxon.750 1.2oz $22.99
- planned add on- Odin Works 4" ARCA rail $42
I asked my gunsmith if he would drill a hole for the BCA charging handle in a lighter bolt carrier group and he said no.. I know that some of you have done that which seems like a great weight saver. The BCA bcg weighs 1 pound, 6.2oz. yikes.
Attachments
You just need to chop your bcg in half.
Appears to be a gas gun
Not a problem. Just chop the gas in half to match the carrier
Similar threads
Featured Video
Latest Articles
- Unlock Precision Shooting: Master Your Hunting Game with Competitive Insights
- Topo Topper Rincon Review
- Tony Trietch on Big Mule Deer, Desert Bulls & Western Hunting Evolution
- The Right to Hunt & Fish Colorado (and North America)
- Mastering New Zealand’s Mountain Hunts: Challenges and Rewards
- Iron Will Turkey Broadhead Review
- Nevada Mule Deer & The Trade-Offs in Wildlife Management
- Spartan SpringBok Bipod Review
- All About Pronghorn & Hunting Big Ones with Chance Marshall
- Bill Vanderheyden Debunks Myths About Long-Distance Accuracy