Ultralight Ultralight Rifles

[goalie]

Thanks guys, ill get some .223 mags.

If you're buying, not using what you have, why not get 300bo mags?

 

[Taudisio]

Thanks guys, ill get some .223 mags.

Any polymer mags you all like? Looks like magpul doesn't make a .223 Pmag under 10 rounds.

L5AWM® 5 Magazine - Lancer Systems

Lancer set out to design a better 5.56 magazine; one with the reliability of steel and the durability and weight of polymer. The L5 Advanced Warfighter Magazine (AWM®) is that magazine. The L5AWM's exclusive hybrid design includes a hardened steel feed lip assembly molded into a proprietary...

lancer-systems.com

My favorite polymer mag

 

[Thegman]

Thanks guys, ill get some .223 mags.

Any polymer mags you all like? Looks like magpul doesn't make a .223 Pmag under 10 rounds.

I think most 5 round mags use the same magazine body as 10 round magazines and just use a follower with longer legs. Unless you're required to use the 5-round magazine for hunting there doesn't seem to be any other advantage to them. Could be wrong on that, but that's how they appear in pictures.

 

[Sundodger]

If you're buying, not using what you have, why not get 300bo mags?

If you have some recommendations for 300 blackout mags that are 5ish round capacity, I'll probably do that. I am pretty green on this AR world, so bear with me...

 

[Sundodger]

I think most 5 round mags use the same magazine body as 10 round magazines and just use a follower with longer legs. Unless you're required to use the 5-round magazine for hunting there doesn't seem to be any other advantage to them. Could be wrong on that, but that's how they appear in pictures.

Well thats too bad.. I was hoping for a smaller, lighter, shorter mag. Ill have to look at the game regs in my state. I can't remember if we have a 5 round limit.

For an UL or ULUL hunting gun, it sure would be nice to nock an ounce or two off with a smaller mag. Are there any options out there like that?

 

[Thegman]

Well thats too bad.. I was hoping for a smaller, lighter, shorter mag. Ill have to look at the game regs in my state. I can't remember if we have a 5 round limit.

For an UL or ULUL hunting gun, it sure would be nice to nock an ounce or two off with a smaller mag. Are there any options out there like that?

In this case, the 10 round mag should be slightly lighter than 5 round mag having less material in the follower. More capacity, less weight. Win-win!

 

[robtattoo]

Well thats too bad.. I was hoping for a smaller, lighter, shorter mag. Ill have to look at the game regs in my state. I can't remember if we have a 5 round limit.

For an UL or ULUL hunting gun, it sure would be nice to nock an ounce or two off with a smaller mag. Are there any options out there like that?

I doubt you'll save more than a half gram on a mag.
The Promags & Lancers are a little heavier than stainless & aluminum might save you a half gram, but they're known for deforming the feed lips.

Unfortunately, a 5 round length mag would sit inside the well.

 

[ezwy]

I've been shooting a lot of 5.56/223, and have an LS Wild pack pillow and rear bag en route. I'll be interested to see if the ULUL is any harder to shoot off field positions than my bolt gun

One of the guys on here with the time and coin for it should take a ULUL to a shoot2hunt 0-600 class and see how they compare to the bolt guns. I bet they would do pretty good if there were no break downs

 

[doverpack12]

In this case, the 10 round mag should be slightly lighter than 5 round mag having less material in the follower. More capacity, less weight. Win-win!

I ordered an asc or duramag 5 round for ARC/Grendel and turns out it was the same as a 10 round body but super heavy because the spring was super dense and filled up the extra space in the bottom.

I’ve since ordered a standard spring and converted that to a 5 round mag

 

[StupidLightweight]

If anyone is interested in my portless BSF carbon-fiber-tensioned barrel in 6mm ARC, PM me. It is 16 inches long and weighs 1 pound, 7.9 ounces. The muzzle isn't threaded, so you'll save weight by not using a suppressor!

It's not been fired much and is accurate as hell. I've since turned the build below into a 5.56, so the 6mm ARC barrel is up for grabs.

 

[Taudisio]

Well thats too bad.. I was hoping for a smaller, lighter, shorter mag. Ill have to look at the game regs in my state. I can't remember if we have a 5 round limit.

For an UL or ULUL hunting gun, it sure would be nice to nock an ounce or two off with a smaller mag. Are there any options out there like that?

This is the same for the lancer mags I posted. I didn’t realize you were trying to cut weight. As stated, they won’t do that.
We have a 5 round mag limit for semi-autos here in OR.