Ultralight Ultralight Rifles

Joined
Jul 15, 2024
Messages
64
In regards to the lightest possible (non AR) bolt action rifle build... theoretically with a titanium or skeletonized action, 17oz including bolt and trigger is possible. A 13oz stock is possible. And if a 17oz 16 inch pencil barrel works for an AR15... maybe someone could make one that lightweight for a kimber or Rem700 style action. So...

Theoretically:
17 oz bolt/action/trigger
17 oz Barrel
13 oz stock

That would be a 47oz (sub 3lb) bare bolt 223rem action rifle.

However, I think the bottom end of the 223rem AR15 bolt rifle ULUL possibilities is under 2.5lbs, maybe even 2.25lbs with a full 16 inch barrel. So, I doubt it would realistically be possible to beat (weightwise) the AR15 platform with a traditional bolt action rifle.
So after combing through the parts weight database, just looking at the posted numbers, a 37 oz build is possible just buying off the shelf stuff, but that begs the question, is sub 2lbs possible?
 
Joined
Dec 15, 2019
Messages
509
Location
Alaska
Well, the Shaw portless barrel certainly shot Sierra Tipped Matchkings well-- better than such a tiny barrel should be expected to shoot on an AR platform. Shot the 10-shot group below yesterday. Probably capable of an even tighter group if I used a finer reticled and heavier scope (center dot of the Nightforce 1-8 I used is larger than the sticker I used for point of aim). I was hoping for a 2 MOA group; this will do nicely.462579970_8777937395617003_2997147896520302295_n.jpg
 

KyleR1985

WKR
Joined
Jul 28, 2019
Messages
608
IMG_5105.png

Mine didn’t shoot any different than my Shaw. Five minutes with a 2-64 tap and cap screw and rocksett and the port is closed. You could buy 4 of these for price of the Shaw.

And it’s lighter.

Yeh the Shaw is the answer. But this is stupid cheap.
 

Trackselk

WKR
Joined
Oct 31, 2020
Messages
521
Location
Idaho
@KyleR1985
Thanks to you, I now have 4 barrels for one gun, and I appreciate it!
-kept chasing lighter & better...

Will these "tapped" ports still work with standard gas blocks if we want to later remove the plug and make it a gas gun?
 
Top