Ultralight Ultralight Rifles

Thanks guys. Yeah, looking back as some of my kills, I 100% would not have been able to shoot some with a red dot. Some of those were great animals and possibly the only shot I had after a week of hard hunting.

I got a really good deal on one of these (12oz). I will try and do a review soon when it arrives and I get behind it.

monstrumtactical.com

2-7x32 Tactical AO Scope

The Monstrum Tactical S2732-R-RGAO is a reliable tactical rifle scope great for close to mid-range shooting. Crystal clear optics with 2-7x magnification. This scope has a functionally designed Rangefinder reticle for faster range estimation and holdover correction.
monstrumtactical.com monstrumtactical.com
 
180ls1 said:
Thanks guys. Yeah, looking back as some of my kills, I 100% would not have been able to shoot some with a red dot. Some of those were great animals and possibly the only shot I had after a week of hard hunting.

I got a really good deal on one of these (12oz). I will try and do a review soon when it arrives and I get behind it.

monstrumtactical.com

2-7x32 Tactical AO Scope

The Monstrum Tactical S2732-R-RGAO is a reliable tactical rifle scope great for close to mid-range shooting. Crystal clear optics with 2-7x magnification. This scope has a functionally designed Rangefinder reticle for faster range estimation and holdover correction.
monstrumtactical.com monstrumtactical.com
Click to expand...

FB_IMG_1578355225854.jpg

No Rob, if you don't have anything nice to say, don't say anything.
 
StupidLightweight said:
Optics are not the place to maximize weight savings on these builds. For self-defense, red dots are great, but for hunting purposes, they don't work well for IDing targets or shooting lanes or antlers, especially in low light.

There's tons of places to save weight on these builds that don't make a lick of difference — a slender barrel, simplistic stock, polymer components, etc. — but by all means, use quality bullets, a good trigger, and a magnified optic. I promise that you will kill more game without ever noticing the weight increase.

magnified optics > red dots > iron sights
Click to expand...
That may be true for a lot of people, but where I hunt I have more worries about being over magnified vs. under magnified. I used an LPVO last season and never felt the need to take it off 1x. Of course my shots are all typically 100 yards and in, and most require quick reactions to deer on the move, and that makes me feel that a red dot or 1x prism is about perfect for what I'm doing. It doesn't hurt that i was able to shoot sub 1.5" groups with my red dot too.

I guess my point for my style of hunting is, why should I add 10+ oz on a 3.5 lb rifle when I'm never going to use the magnification anyway?
 
180ls1 said:
You wont hurt my feelings. This is the slide after all...
Click to expand...
They're just your usual, run-of-the-mill, cheap, Chiwanese crap. On par with the likes of Barska, Tasco & Nikko-Stirling at the same price point. I wouldn't expect it to survive long. And don't use it if it's humid. Or cold. Or raining. Oddly, Monstrum do make some excellent rings!

I've only ever found one halfway useful optic under $100 & it's the Primary Arms 1-4x24 sfp. I've had these things hold zero on stupid recoiling .458s, spring piston air rifles & at least 1 AR that's fallen off a truck tailgate. I've got 2 on rifles & a spare & each one has at least a few thousand rounds on it, of rounds light to silly calibers. Unfortunately, in this situation, they're as heavy as fuuuuu.... 18+oz, if memory serves.
 
robtattoo said:
They're just your usual, run-of-the-mill, cheap, Chiwanese crap. On par with the likes of Barska, Tasco & Nikko-Stirling at the same price point. I wouldn't expect it to survive long. And don't use it if it's humid. Or cold. Or raining. Oddly, Monstrum do make some excellent rings!

I've only ever found one halfway useful optic under $100 & it's the Primary Arms 1-4x24 sfp. I've had these things hold zero on stupid recoiling .458s, spring piston air rifles & at least 1 AR that's fallen off a truck tailgate. I've got 2 on rifles & a spare & each one has at least a few thousand rounds on it, of rounds light to silly calibers. Unfortunately, in this situation, they're as heavy as fuuuuu.... 18+oz, if memory serves.
Click to expand...

Yeah, that's kinda what I figured. For $311 it came with an AR and mag so I really didn't have to choice but to buy it lol.


Bear creek barrels are out for delivery today. Hopefully update with weights today.
 
robtattoo said:
I should have my Ham'r barrel today! Brass & bullets showed up yesterday. I'm giddy to take my little UL-UL elk hunting this fall.
Click to expand...

Got my barrel yesterday. Got around to blanking off the gas port & installing it today & came across an interesting issue.

With the free float nut torqued in place, the bolt wouldn't lock forwards. It'd close, then spring itself back open. It didn't matter how much I forced it (indicating super tight head space & the bolt binding on the breech face) it wouldn't go.
I suspected the opposite; excessive headspace & the locking lugs binding on the lugs in the barrel extension.
I've never seen this before!

I ended up using some 360, 800 & 1200 grit wet & dry on a piece of precision flat stock to polish a couple off thou of the upper receiver threads, setting the barrel back ever so slightly. That fixed her up a treat!

I need to load up a few dummy rounds now & make sure they'll chamber & the bolt locks on them. I may have to shorten a little more yet, we'll have to see.....
 
I see solo 300 only has 300 BO stuff on his site now, wonder why? Think I’m gonna sell my 10” 350 legend upper/stock if anyone is interested, I want to utilize my SBR’d lower elsewhere.
 
180ls1 said:
The 3 bear creek 16" all came in.

All 3 were 1.06lbs individually, so =16.96oz
Click to expand...
That's really interesting. A kind of proof of concept on how light a 223 barrel can be. Imagine a non-threaded, unported barrel with no gas journal with the same profile. Would likely be under 16 oz.

Can you take some measurements of the barrel diameters. I'm curious how far it's turned down.
 
robtattoo said:
Got my barrel yesterday. Got around to blanking off the gas port & installing it today & came across an interesting issue.

With the free float nut torqued in place, the bolt wouldn't lock forwards. It'd close, then spring itself back open. It didn't matter how much I forced it (indicating super tight head space & the bolt binding on the breech face) it wouldn't go.
I suspected the opposite; excessive headspace & the locking lugs binding on the lugs in the barrel extension.
I've never seen this before!

I ended up using some 360, 800 & 1200 grit wet & dry on a piece of precision flat stock to polish a couple off thou of the upper receiver threads, setting the barrel back ever so slightly. That fixed her up a treat!

I need to load up a few dummy rounds now & make sure they'll chamber & the bolt locks on them. I may have to shorten a little more yet, we'll have to see.....
Click to expand...
Yeah, that is pretty weird. Sounds like the barrel extension was a little out of spec. Maybe some tolerance stacking with the bolt??

My last 300 HAM’R barrel had more headspace than my other two HAM’R barrels (on the long side of the headspace specs - the other two are close to minimum). Was a little excessive using the same bolt I used with my other two HAM’R barrels. One of my spare bolts was minimal headspace and evened things out.
 
Thegman said:
That's really interesting. A kind of proof of concept on how light a 223 barrel can be. Imagine a non-threaded, unported barrel with no gas journal with the same profile. Would likely be under 16 oz.

Can you take some measurements of the barrel diameters. I'm curious how far it's turned down.
Click to expand...

Unfortunately, I do not have the tools to do that. I'll update should I come across some.
 
ChrisAU said:
I see solo 300 only has 300 BO stuff on his site now, wonder why? Think I’m gonna sell my 10” 350 legend upper/stock if anyone is interested, I want to utilize my SBR’d lower elsewhere.
Click to expand...

Shoot me the details, please.
 
I have a folding Sig pistol brace, the kind that lands on a picatinny rear attachment. I want to take the rubber sides off and replace them with the farrow Sig PCB brace to stock conversion piece.

No install instructions were included.

Anyway to do this without destroying the factory rubber parts?

farrow.tech

Sig PCB Brace to Stock Conversion

farrow.tech farrow.tech
 
You must log in or register to reply here.

Similar threads

S
Suppressor Problems
2
Replies
25
Views
1K
Pilsner
Pilsner
S
Rock Rive Arms rifles
Replies
16
Views
643
Gulogulo
G
M
SP10 and SP10M 6.5CM
Replies
1
Views
239
shax2lex
S
PistolPete
CZ 600+ Launched - Swappable Barrels
Replies
8
Views
1K
Reddish
Reddish
Riflman
Best Places to Sell a Custom Ultralight Rifle today?
Replies
5
Views
395
Snowwolfe
S

Latest posts

Featured Video

Latest Articles

Back
Top