First post! Been lurking for a while. Almost endless great discussion.
I am a newbie when it comes to tripods, and really glassing in general. I'm curious to hear your thoughts on something I've been considering.
I recently purchased a Sirui St-125 + VA-5 head, on a screaming deal. Planning on picking up some 15x56 binos to round out the glassing kit- previously have just ran 10x42s in a chest rig here in MT.
My initial reaction is that this is a very high quality tripod/head rig. But, a bit heavy and possibly overkill for running up and down mountains. That being said- if I could shoot off this as well, I can easily justify the weight.
There are two options that are most intriguing to me:
1. Pickup a Short center column + Shooting Yoke
- Swapping out columns (with the head on the long column, yoke on short) would be fast, canting is easy in a yoke, and this setup would support a lot of weight. Ultimately would add only about 5oz total (guess). Stable setup, only $30 to implement, however the rifle is not locked-in to the tripod.
2. Replace VA-5 with Smallrig CH20 Head + Shorty Arca Rail
-People seem to like the CH10 head. For a few bucks (and ounces) more, the CH20 appears to be the same head, plus a leveling base. That takes care of canting, and if the performance is on par with the CH10, it should be plenty adequate for glassing with 10x or 15x binos. Plus, it's rated at 8.8 pounds; that theoretically should handle my tikka, with a little arca rail attached. This option would actually drop at least 6oz or so from the VA-5 Head, and maybe 11oz in total from option 1.
Ok, if nothing else, I have brain dumped and put my thoughts to the keyboard. Any input received now is just gravy.
I am a newbie when it comes to tripods, and really glassing in general. I'm curious to hear your thoughts on something I've been considering.
I recently purchased a Sirui St-125 + VA-5 head, on a screaming deal. Planning on picking up some 15x56 binos to round out the glassing kit- previously have just ran 10x42s in a chest rig here in MT.
My initial reaction is that this is a very high quality tripod/head rig. But, a bit heavy and possibly overkill for running up and down mountains. That being said- if I could shoot off this as well, I can easily justify the weight.
There are two options that are most intriguing to me:
1. Pickup a Short center column + Shooting Yoke
- Swapping out columns (with the head on the long column, yoke on short) would be fast, canting is easy in a yoke, and this setup would support a lot of weight. Ultimately would add only about 5oz total (guess). Stable setup, only $30 to implement, however the rifle is not locked-in to the tripod.
2. Replace VA-5 with Smallrig CH20 Head + Shorty Arca Rail
-People seem to like the CH10 head. For a few bucks (and ounces) more, the CH20 appears to be the same head, plus a leveling base. That takes care of canting, and if the performance is on par with the CH10, it should be plenty adequate for glassing with 10x or 15x binos. Plus, it's rated at 8.8 pounds; that theoretically should handle my tikka, with a little arca rail attached. This option would actually drop at least 6oz or so from the VA-5 Head, and maybe 11oz in total from option 1.
Ok, if nothing else, I have brain dumped and put my thoughts to the keyboard. Any input received now is just gravy.