Tripod and Head for Swarovski BTX and 115mm Lens Recommendation

Jon01

FNG
Joined
Dec 22, 2021
Messages
18
Just got the BTX and 115mm combo with the magnifier. Way too heavy for my manfrotto befree I used for a standard spotter. Suggestions on a setup for this? I found a lot of suggestions for the 85 and 95 but not the 115 which is way heavier.
 
Here you go...

 
Thanks, play is really in the tripod. I have a sirui va-5 head now. I can try the bigger plate as well.
 
Down to a few options for the tripod rrs ascend 14, rrs 33l, swaro cct, gitzo mountaineer or slik cf-934
 
I have a the btx 115, I don't like the outdoorsman balance rail cuz when I wana swap to an stx real fast its a pain...il sell it ya cheap if you'd like to play with it

My tripod is a 14series RRS with the bh 30 head...this is the absolute minimum for the 115...the tripod is fine but when hauling the 115 I could see bumping up to the bh 40 head
 
I have a the btx 115, I don't like the outdoorsman balance rail cuz when I wana swap to an stx real fast its a pain...il sell it ya cheap if you'd like to play with it

My tripod is a 14series RRS with the bh 30 head...this is the absolute minimum for the 115...the tripod is fine but when hauling the 115 I could see bumping up to the bh 40 head
Got it, send me a message. Maybe I’ll take you up on that.
 
Best bet is to go with the Slik 824CF with the Sirui VH10X head
Call me at 516-217-12000 to discuss this and other options

Joel
 
The 824CF can hold over 15 pounds. Your set up is no where near that heavy. The BTX is 3.1 Lbs and the 115 Module is 7.7. Total 10.8
 
Back
Top