Triple 6 Update/Delay

[HuntHarder]

Has the total weight of Reaper and reflex been stated? Or Db #'s, length? I feel like I may have missed a large portion of this discussion.

 

[omicron1792]

Very cool option. I was under the impression that if it was compatible with non NFA items then it wouldn’t need its own tax stamp (conversations with silencerco begging them to release something I can stick on my scythe). Similar to the OCL reflex, which to my understanding does not need a stamp

AB has always been required to treat their reflex like a separate NFA item.

 

[YaakRiver]

In case anyone wasn't aware . . .

 

[Schmo]

In case anyone wasn't aware . . .

I want

 

[ArmedInMD]

In case anyone wasn't aware . . .

How do you get these alerts...I need to make sure I get the updates!!

 

[YaakRiver]

How do you get these alerts...I need to make sure I get the updates!!

The easiest way is to go to https://unknownsuppressors.com/, scroll all the way to the bottom and put your email in the spot that looks like this: If you don't want to sign up for the emails then you'll need to check their roadmap page. I think the dates are subject to change but it's a good reference: https://unknownsuppressors.com/roadmap/

 

[Cory_Shoot2Hunt]

Has the total weight of Reaper and reflex been stated? Or Db #'s, length? I feel like I may have missed a large portion of this discussion.

Nothing is finalized 100% so posting exact info will just be not concrete numbers.

 

[Unknown Suppressors]

Has the total weight of Reaper and reflex been stated? Or Db #'s, length? I feel like I may have missed a large portion of this discussion.

Design is very much not done, we have done a bunch of testing but as far as db reduction goes, cartridge dependant but it should add a 2-6db reduction. On our latest hub reflex prototype total weight of a reaper with it is 12oz even.

 

[Unknown Suppressors]

To provide an update on the 6mm suppressor. Official name OG6S. The design is complete. We are right now doing the official db and destructive testing. Final weight is about 6.3-6.4oz. 6" overall length 3" muzzle forward 3" over the barrel. 1.625" diameter. We dont have an official db number right this minute but, it is going to be right around 130dBA on an 18" 6 Creed.

 

[43.6N]

OG65 vs OG6S?

You sure that’s not going to cause you guys a ton of headaches and phone calls?

 

[Unknown Suppressors]

OG65 vs OG6S?

You sure that’s not going to cause you guys a ton of headaches and phone calls?

Every name has caused a ton of headaches thus far. This name is the most in-line with our current products. when you see it will probably show as OG6-S or something to that effect.

 

[Aux Arc]

To provide an update on the 6mm suppressor. Official name OG6S. The design is complete. We are right now doing the official db and destructive testing. Final weight is about 6.3-6.4oz. 6" overall length 3" muzzle forward 3" over the barrel. 1.625" diameter. We dont have an official db number right this minute but, it is going to be right around 130dBA on an 18" 6 Creed.

Are you still on schedule for April release? And when you do release them will they be ready to ship or will they have to be built?

I “need” to buy another suppressor in April but I would really like to have it by June/July. I’m content getting another OG65 but would rather lose another inch of barrel length.

 

[ChrisAU]

To provide an update on the 6mm suppressor. Official name OG6S. The design is complete. We are right now doing the official db and destructive testing. Final weight is about 6.3-6.4oz. 6" overall length 3" muzzle forward 3" over the barrel. 1.625" diameter. We dont have an official db number right this minute but, it is going to be right around 130dBA on an 18" 6 Creed.

Remind me max barrel diameter?