Triple 6 Update/Delay

[nm.otter]

.338 ARC has a big-ish bore but very little powder. Some day...

 

[cwitt]

End cap changes is totally different than bore size.

I’m sorry, I missed where he specified bore size was what he meant in his question. Thanks for the clarification.

 

[Escalante11]

The 6mm suppressor is going to be about 1.5oz lighter, 2" shorter overall, and most importantly only 3" in front of the muzzle. For most people running a muzzle brake your talking about only adding .5-1" length overall.

What about sound reduction though. How would the 6mm suppressor (based on current prototypes) and the OG 6.5 compare on a 20” 6mm Creedmoor?

 

[wyosam]

He means up to .375…

Sure, that works. No need for a bunch of different cans for the big stuff. I’ve been pondering opening the 284 up even more than 338. Some’s good, more’s better. Should probably do a 6 or 25 on that case, too.


Sent from my iPhone using Tapatalk

 

[Unknown Suppressors]

What about sound reduction though. How would the 6mm suppressor (based on current prototypes) and the OG 6.5 compare on a 20” 6mm Creedmoor?

I don't want to say with certainty because we havent finished the testing but, the two are going to be very similar in performance on a 20" 6mm creed. Some folks in the last S2H class got to here our best of the best prototypes and honestly can probably speak to the performance better than I can. I essentially print them, do minor testing, then they go into the black hole of testing that I am not always involved with.

 

[Escalante11]

I don't want to say with certainty because we havent finished the testing but, the two are going to be very similar in performance on a 20" 6mm creed. Some folks in the last S2H class got to here our best of the best prototypes and honestly can probably speak to the performance better than I can. I essentially print them, do minor testing, then they go into the black hole of testing that I am not always involved with.

Thank you. Crossing my fingers this will be cheaper too given less material?

 

[Unknown Suppressors]

Thank you. Crossing my fingers this will be cheaper too given less material?

As Ive stated before, material doesnt play a large role in total cost. Print time by far and away is the biggest driving factor of cost. That said, there is two inches less of printing so, price point will be $799

 

[Formidilosus]

What about sound reduction though. How would the 6mm suppressor (based on current prototypes) and the OG 6.5 compare on a 20” 6mm Creedmoor?

About the same, maybe the current front runner triple 6 is a bit quieter on 6mm and .224’s- but it isn’t a lot. The main advantage is 3” muzzle forward.


At the S2H class last week, the front runner Triple 6 and the OG22 were the best sounding, and quietest cans on the line. There were Scyths, AB10, OG, OG65’s, OG6, OGL, TBAC UL7 Gen2.

 

[Escalante11]

As Ive stated before, material doesnt play a large role in total cost. Print time by far and away is the biggest driving factor of cost. That said, there is two inches less of printing so, price point will be $799

Fantastic, thanks guys!

 

[2Stamp]

.... That said, there is two inches less of printing so, price point will be $799

 

[Coopsdaddy]

16 inch 223 and 6.5cm with maybe a 16-18 6cm in the future is this going to be a better option than the og6.5.
Using a ultra 7 now and would like less length and db if possible.

 

[Formidilosus]

16 inch 223 and 6.5cm with maybe a 16-18 6cm in the future is this going to be a better option than the og6.5.
Using a ultra 7 now and would like less length and db if possible.

Triple six. It won’t work on a 6.5mm.

 

[Foster_65]

Triple six. It won’t work on a 6.5mm.

Is there any numbers on the latest rev? Any ballpark ideas on dbs from a 20 in UM?

 

[Formidilosus]

Is there any numbers on the latest rev?

Not that I believe.

Any ballpark ideas on dbs from a 20 in UM?

Again, not that I would believe.


It “seems” that it will end up about 130-131 dB (A) from a 18” 6cm (it’s showing numbers less than that). But, the limit of the sound meter is coming into play.

 

[Foster_65]

Not that I believe.




Again, not that I would believe.


It “seems” that it will end up about 130-131 dB (A) from a 18” 6cm (it’s showing numbers less than that). But, the limit of the sound meter is coming into play.

Perfect. That helps, thanks .

 

[WI-Carcosa]

Not that I believe.




Again, not that I would believe.


It “seems” that it will end up about 130-131 dB (A) from a 18” 6cm (it’s showing numbers less than that). But, the limit of the sound meter is coming into play.

For 223 hunting and training, would you take the Three or wait for OG 22? Thanks for the info!

 

[Formidilosus]

For 223 hunting and training, would you take the Three or wait for OG 22? Thanks for the info!

ooo. Depends. The Triple 6 or whatever they are calling it now, and the OG22 were the best sounding, and quietest cans at the last S2H class by a pretty large margin. The OG22 will likely meter quieter, but the Triple 6 sounds very good.

 

[Foster_65]

For 223 hunting and training, would you take the Three or wait for OG 22? Thanks for the info!

Good question. If form factor is the same, I wonder how much performance will be gained. I think either way I would go with the three (og6) over the 22 just for wider range of versatility. I’m pretty sold on these otb cans so maybe just gonna have to have them all. I prioritize length past muzzle more than anything but I 100% noticed a tone difference from tge 65 vs all my other muzzle forward cans, which was pretty cool to hear when my kids were shooting and I was to the side and slightly in front of.

 

[WI-Carcosa]

ooo. Depends. The Triple 6 or whatever they are calling it now, and the OG22 were the best sounding, and quietest cans at the last S2H class by a pretty large margin. The OG22 will likely meter quieter, but the Triple 6 sounds very good.

Thank you. If the Three is 3 in front and 6 oz compared to the og22 (which I am guessing is the same foot print as the OGs?), and performed close enough with sound, that sounds like a winner to me.

 

[Moose Drool]

Is the triple 6 usable on a 223 AR?