Triple 6 Update/Delay

[nm.otter]

.338 ARC has a big-ish bore but very little powder. Some day...

 

[cwitt]

End cap changes is totally different than bore size.

I’m sorry, I missed where he specified bore size was what he meant in his question. Thanks for the clarification.

 

[Escalante11]

The 6mm suppressor is going to be about 1.5oz lighter, 2" shorter overall, and most importantly only 3" in front of the muzzle. For most people running a muzzle brake your talking about only adding .5-1" length overall.

What about sound reduction though. How would the 6mm suppressor (based on current prototypes) and the OG 6.5 compare on a 20” 6mm Creedmoor?

 

[wyosam]

He means up to .375…

Sure, that works. No need for a bunch of different cans for the big stuff. I’ve been pondering opening the 284 up even more than 338. Some’s good, more’s better. Should probably do a 6 or 25 on that case, too.


Sent from my iPhone using Tapatalk

 

[Unknown Suppressors]

What about sound reduction though. How would the 6mm suppressor (based on current prototypes) and the OG 6.5 compare on a 20” 6mm Creedmoor?

I don't want to say with certainty because we havent finished the testing but, the two are going to be very similar in performance on a 20" 6mm creed. Some folks in the last S2H class got to here our best of the best prototypes and honestly can probably speak to the performance better than I can. I essentially print them, do minor testing, then they go into the black hole of testing that I am not always involved with.

 

[Escalante11]

I don't want to say with certainty because we havent finished the testing but, the two are going to be very similar in performance on a 20" 6mm creed. Some folks in the last S2H class got to here our best of the best prototypes and honestly can probably speak to the performance better than I can. I essentially print them, do minor testing, then they go into the black hole of testing that I am not always involved with.

Thank you. Crossing my fingers this will be cheaper too given less material?

 

[Unknown Suppressors]

Thank you. Crossing my fingers this will be cheaper too given less material?

As Ive stated before, material doesnt play a large role in total cost. Print time by far and away is the biggest driving factor of cost. That said, there is two inches less of printing so, price point will be $799

 

[Formidilosus]

What about sound reduction though. How would the 6mm suppressor (based on current prototypes) and the OG 6.5 compare on a 20” 6mm Creedmoor?

About the same, maybe the current front runner triple 6 is a bit quieter on 6mm and .224’s- but it isn’t a lot. The main advantage is 3” muzzle forward.


At the S2H class last week, the front runner Triple 6 and the OG22 were the best sounding, and quietest cans on the line. There were Scyths, AB10, OG, OG65’s, OG6, OGL, TBAC UL7 Gen2.