Tricer RP Bipod Review

[doc holiday13]

Here is my review on this.

D

Thread 'Tricer RP review'

Jul 28, 2025

Its been a bit of time coming and I know there are a couple of reviews out there, so here is my experience

My experience with bipods: MDT, Atlas, Harris, and some other Atlas knock off, now Tricer.

Shooting type I do: PRS, NRL, casual target, hunting.

This past weekend I shot a NRL match with my tricer. I had my hesitations of this being useful for a shooting comp because of the flex that comes from CF legs AND as stated in other threads the bipod has cant and pan. I've never had panning in my bipods and based on the amount of pressure I put on a bipod, I didn't think I'd like it. Well...

• doc holiday13
• Replies: 0
• Forum: Gear

• 

I'm going to pin the ball to get rid of the paning feature since it is not independent of the cant feature. The tripod twisted on me several times during a NRL match. I wasn't a fan of that happening

 

[Packer9037]

How are you pinning the ball to prevent the pan? Or do you have a link of an example you're following?

 

[Packer9037]

How are you pinning the ball to prevent the pan? Or do you have a link of an example you're following?

disregard I found a thread.

 

[Coopsdaddy]

Thread on locking it out?

 

[Packer9037]

Post in thread 'Fix the Panning in your Tricer RP Bipod'

Jun 4, 2025

The Tricer RP seems great in every regard besides the fact that it pans 360° (and the owner is hard to like)

So I disassembled the bipod, determined the center of the spherical ball and socket joint, then crossdrilled and bolted the joint. The bolt prevents panning, but allows the bipod to cant still.

View attachment 885087

Here are the instructions:

1. Measure 21.35mm from the bottom of the center cylinder and make a mark. This is critical as this is the location of the center of the ball and socket. If you do not drill it centered, the bipod will not cant. View attachment 885082
2. Eyeball...

• Moser1323

 

[Packer9037]

It also looks like if you could find a plastic washer the correct thickness, you could lock out the pan but maintain the swivel. As it is I just have it locked and don't anticipate using the pan/swivel option. I'm strictly using it for hunting.