Trending to 88’s?

Appears that is where it is headed. Personally I would like to see a manufacturer deliver a 100-105 weight 22 cal to leverage some of the overbore from the 22 CM.
 
I like 77's. But with the horse power of even a short barrel 22 Creed i loaded up some 88 tmk tests. I originally tried the Hornady but like others have said my barrel wouldn't shoot them. Regardless of powder. I tried everything.

Kids used 85.5 on one deer then 77's on the other three.

I'll def be using 77's in the 223 ackley.
 
The Hornady 88s have a bit of bad reputation terminally whereas the 80s do not. I have no experience shooting either on game at this point, but refer you to other discussions about it.

There are diminishing returns with the heavier, 22 caliber bullets at longer ranges. Spotting impacts on steel for practice with the 108 and 115 and 6 mm is hard enough at the ranges where the added BC would begin to make big differences.

There is also a substantial difference in trace. That is one reason why many go to the magical 25 cal with the 134/5 class bullets. Balance of recoil and down range visibility in competition and still having more bullet on target.

There are 95 grain Sierra match King you could nose ring and run like the 115 DTACs. I have thought about that, but Tubbs “leased” the nose ring gadget and locked down control of it which discouraged me from looking more into it.

I don’t think you’ll ever see anything heavier than 95 grains in a 22 caliber bullet. Could be wrong though.

For practical hunting ranges, the 80 grain bullets are great choices and effective, say inside 400-500. Beyond that, I like the higher BC 6 mm out of the PRC or SAUM case like the 6 UM 30 or 40.
 
Just been researching 223 and seems so many posts about these 88’s and guys building new ones more geared to them. Just checkin see if I’m reading the temp right

And if so...why?
 
Just been researching 223 and seems so many posts about these 88’s and guys building new ones more geared to them. Just checkin see if I’m reading the temp right

And if so...why?

I think a lot of people on RS are talking about the 88s because the Sierra 88-grain TMKs just got released in the past month and a lot of folks are shooting them.

But, from what I have seen, there is no reason to build towards the 88s in the larger .224 calibers. The reported results from 1:8” twist Tikka barrels look great. And for me, the 77-grain TMKs seem more ideal in the .223.
 
The Hornady 88s have a bit of bad reputation terminally whereas the 80s do not. I have no experience shooting either on game at this point, but refer you to other discussions about it.

There are diminishing returns with the heavier, 22 caliber bullets at longer ranges. Spotting impacts on steel for practice with the 108 and 115 and 6 mm is hard enough at the ranges where the added BC would begin to make big differences.

There is also a substantial difference in trace. That is one reason why many go to the magical 25 cal with the 134/5 class bullets. Balance of recoil and down range visibility in competition and still having more bullet on target.

There are 95 grain Sierra match King you could nose ring and run like the 115 DTACs. I have thought about that, but Tubbs “leased” the nose ring gadget and locked down control of it which discouraged me from looking more into it.

I don’t think you’ll ever see anything heavier than 95 grains in a 22 caliber bullet. Could be wrong though.

For practical hunting ranges, the 80 grain bullets are great choices and effective, say inside 400-500. Beyond that, I like the higher BC 6 mm out of the PRC or SAUM case like the 6 UM 30 or 40.
I dunno’, there’s about 100 dead elk moose and deer in that .223 thread killed with 88 ELDMs…. Maybe they’ve been inconsistent lately like a lot of other Hornady products?
 
I think a lot of people on RS are talking about the 88s because the Sierra 88-grain TMKs just got released in the past month and a lot of folks are shooting them.

But, from what I have seen, there is no reason to build towards the 88s in the larger .224 calibers. The reported results from 1:8” twist Tikka barrels look great. And for me, the 77-grain TMKs seem more ideal in the .223.
Yeah, the new bullets are getting a lot of attention, as they should. I wanna know how all the new 223 and 6mm bullets run.

I will absolutely give the new 88 TMK a run in my 22 creed, but for my 14” and 16” I favor a lighter bullet with more velocity like a .223 where I will stick with the 77 and 80 grain.

Out of my 20” barrels, I think the 88s are more worth the squeeze.

Same with my 16” 6 creed, I will more likely run the lighter bullets, but with my 6 PRC I will try the 116.
 
I dunno’, there’s about 100 dead elk moose and deer in that .223 thread killed with 88 ELDMs…. Maybe they’ve been inconsistent lately like a lot of other Hornady products?
You know how Rokslide is, if it’s not perfect in 100% fail proof guys aren’t going to use it as much. I could have miss remembered whether it was terminal performance or maybe just that they were hard to get shooting as easily and as good as the 80 grain out of lots of rifles.

That obviously doesn’t apply to the 88 grain TMK, they are new. So we just don’t know.
 
You know how Rokslide is, if it’s not perfect in 100% fail proof guys aren’t going to use it as much. I could have miss remembered whether it was terminal performance or maybe just that they were hard to get shooting as easily and as good as the 80 grain out of lots of rifles.

That obviously doesn’t apply to the 88 grain TMK, they are new. So we just don’t know.
Roger that. I have definitely seen a few cases of the 88s be picky at higher velocities and slightly inconsistent from lot to lot, hell even from day to day. And I know several buddies with the same complaint.

if the 88s are consistently accurate and consistent killers I think they’ll sell a million of them just here on RS alone 😃
 
I think a lot of people on RS are talking about the 88s because the Sierra 88-grain TMKs just got released in the past month and a lot of folks are shooting them.
Exactly
But, from what I have seen, there is no reason to build towards the 88s in the larger .224 calibers. The reported results from 1:8” twist Tikka barrels look great. And for me, the 77-grain TMKs seem more ideal in the .223.
22 Ackley Improved here. 18" bbl.
I've had great success with the 77 TMKs and they shoot fantastically in my rifle. Any reasonably intelligent person would quit right there.........


However, from what I've heard the longer 88 should give a little more penetration with a smidge less wind effect .
So far accuracy has been very good with the 88s and the velocity lines up perfectly with quick drop
to 700 yards.
I really want to kill something with them!!
 
I dunno’, there’s about 100 dead elk moose and deer in that .223 thread killed with 88 ELDMs…. Maybe they’ve been inconsistent lately like a lot of other Hornady products?

All it takes is Form posting the equivalent of “I heard a report that one of these [insert bullet or gear here] might not have performed optimally” for half of RokSlide to decide they need to switch to the new hotness.
 
Roger that. I have definitely seen a few cases of the 88s be picky at higher velocities and slightly inconsistent from lot to lot, hell even from day to day. And I know several buddies with the same complaint.

if the 88s are consistently accurate and consistent killers I think they’ll sell a million of them just here on RS alone

I have seen the same reports. They have always been there. The 88-grain TMK doesn’t appear to be as picky as the 88-grain ELDM, but if I had a thousand 88-grain ELDMs and a working load, I wouldn’t be trying to sell them. But many people would.

There’s a lot of “small bore, heavy for caliber bullets are good, so heavier for caliber must be better” going on around here.
 
I think a lot of people on RS are talking about the 88s because the Sierra 88-grain TMKs just got released in the past month and a lot of folks are shooting them.

But, from what I have seen, there is no reason to build towards the 88s in the larger .224 calibers. The reported results from 1:8” twist Tikka barrels look great. And for me, the 77-grain TMKs seem more ideal in the .223.
No my searches are google wide, it’s not just rokslide yapping about them it’s lots of usual forums. Rokslide prolly started the deal lol.
 
I dunno’, there’s about 100 dead elk moose and deer in that .223 thread killed with 88 ELDMs…. Maybe they’ve been inconsistent lately like a lot of other Hornady products?
And sort of curious if there’s any terminal reasons guys are liking 88 vs the mid 70’s stuff? I sounds like 73’s good, 77’s that plus a couple inches so stands to math 88’s take 77’s and add couple more inches? I don’t think I could get through the 700 pages to see if there’s a notice on 88’s terminally over the gold standard 70 somethings? Is that pattern noticed within that thread?
 
The 77s shoot soooo good in my 223 that I won't mess with anything else. That said I might be building a 22 creed in the near future smd the new 88s will be on my list to try
 
My .223's hammer with the 75 ELD-M, but now that Alberta has opened up BG hunting to the .224" caliber rifles, I've got a 6.5" twist barrel that's about to be installed on a Tikka T3X and chambered in .223 Wylde for the 88 ELD-M.
 
.420 versus .525 BC

Not limited to AR Mag length

Handload

Assuming Sierra does their part in making the bullet consistently perform terminally, same wounding results plus a little extra mass getting to offside hide or through it.

Unless you were sitting in thousands of bullets at old price, no real price difference buying tomorrow.


2.26” overall length, 70’s all day. Can load 2.4-2.6, gimme the 88’s.


Doesn’t hurt that the new 88 TMK’s seem to be easy to get shooting right.
 
Back
Top