Tikka T3 action
Aftermarket LA bolt stop, shroud and bolt handle. Bolt is spiral fluted from LRI
25.75" Brux barrel (from muzzle to front of action; measures 0.600" at muzzle so a #2 contour)
no muzzle threads
8 twist
Manners EHTA stock - swamp camo - pic rail with cup up front, flush cup bottom rear and left side
Barreled action and bottom metal cerakoted a sand-esque color to match the stock
Mountain Tactical bottom metal and LA magazine
Has aftermarket trigger spring and I cut away some of the trigger hanger bolt to allow lighter pull weight, doesn't affect trigger retention in the action
Weight is around 10.4# as pictured(scope was an LRTSi 4.5-18; rifle should weigh in at approx 8.75# with rings)
Round count is around 75
Scope is not available any longer, currently has different scope, Zeiss Conquest, mounted.
Will include rcbs FL dies, brass (50 new PPU and about 45 once fired PPU brass, and factory ammo (95gr SST - will verify # of rounds). Also have 2 modified cases for the hornday oal gage
Didnt do a full load development. Threw a load together with 108 eldms and H100V. One group measured about 0.65" with 4 shots and the other is about 0.8" with 5 shots. 43gr averaged 3011fps and 43.5 averaged 3050. no signs of pressure.
$1750 split shipping
Aftermarket LA bolt stop, shroud and bolt handle. Bolt is spiral fluted from LRI
25.75" Brux barrel (from muzzle to front of action; measures 0.600" at muzzle so a #2 contour)
no muzzle threads
8 twist
Manners EHTA stock - swamp camo - pic rail with cup up front, flush cup bottom rear and left side
Barreled action and bottom metal cerakoted a sand-esque color to match the stock
Mountain Tactical bottom metal and LA magazine
Has aftermarket trigger spring and I cut away some of the trigger hanger bolt to allow lighter pull weight, doesn't affect trigger retention in the action
Weight is around 10.4# as pictured(scope was an LRTSi 4.5-18; rifle should weigh in at approx 8.75# with rings)
Round count is around 75
Scope is not available any longer, currently has different scope, Zeiss Conquest, mounted.
Will include rcbs FL dies, brass (50 new PPU and about 45 once fired PPU brass, and factory ammo (95gr SST - will verify # of rounds). Also have 2 modified cases for the hornday oal gage
Didnt do a full load development. Threw a load together with 108 eldms and H100V. One group measured about 0.65" with 4 shots and the other is about 0.8" with 5 shots. 43gr averaged 3011fps and 43.5 averaged 3050. no signs of pressure.
$1750 split shipping
