Tikka Roughtech and Supressor?

[TimberHunter]

When I measured the the shoulder a year or so ago on a rifle in a store, it was .733. 5/8” threads should be around .625”. That’s leaves about .108” of shoulder.

I believe suppressor companies recommend .100” as minimum. Anyone successfully out a can on a tikka roughtech?


Sent from my iPhone using Tapatalk

 

[Antares]

You're thinking that the factory 5/8–24 threads don't leave enough shoulder? Is that what you're saying? Was the barrel you measured a Roughtech (they have a larger contour barrel than Tikka's standard sporter barrel).

Regardless, I have mounted both a GEMTECH Tracker and APA Little Bastard on my Roughtech without issue. There's plenty of shoulder.

 

[Gorp2007]

TBAC minimum recommended muzzle diameter is 0.725 for 5/8x24. You should be good to go.

https://thunderbeastarms.com/pdf/TBAC_Centerfire_Rifle_Thread_Guide.pdf

 

[TimberHunter]

You're thinking that the factory 5/8–24 threads don't leave enough shoulder? Is that what you're saying? Was the barrel you measured a Roughtech (they have a larger contour barrel than Tikka's standard sporter barrel).

Regardless, I have mounted both a GEMTECH Tracker and APA Little Bastard on my Roughtech without issue. There's plenty of shoulder.

The rifled I measured last year was the rough tech with the heavier barrel and tan stock (factory thread 5/8-24). Good to know the roughtech and your suppressors work together!

On a side note, does the rifle feel very long when you put your suppressor on? I’m looking at the 6.5 creed with a 24”. My suppressor is approx 8” long. Would be for open country mule hunting


Sent from my iPhone using Tapatalk

 

[mcr-85]

I have a Tikka T3x Superlite 6.5x284. Its threaded 1/2-28 and I shoot my 5/8-24 suppressors on it with a thread adapter. I know not exactly what you are asking but there is a way to make it work on smaller profile barrels. Its a 7" on a 24" barrel. It is long but manageable.

..................Would be for open country mule hunting


Sent from my iPhone using Tapatalk

On another note, I'd hate to be riding my mule through where ever you are hunting though. Don't shoot the ones with riders please.

 

[Antares]

On a side note, does the rifle feel very long when you put your suppressor on? I’m looking at the 6.5 creed with a 24”. My suppressor is approx 8” long. Would be for open country mule hunting

Same rifle I have (24" 6.5CM). Yeah, it's long with a suppressor on it...no getting around that.

 

[TimberHunter]

I have a Tikka T3x Superlite 6.5x284. Its threaded 1/2-28 and I shoot my 5/8-24 suppressors on it with a thread adapter. I know not exactly what you are asking but there is a way to make it work on smaller profile barrels. Its a 7" on a 24" barrel. It is long but manageable.



On another note, I'd hate to be riding my mule through where ever you are hunting though. Don't shoot the ones with riders please.

Lol don’t worry, I try to keep the shot at or under 500 yards. I have good glass (spotter and binos) so I’d hope I would know the difference between a mule and mule deer lol


Sent from my iPhone using Tapatalk

 

[TimberHunter]

Same rifle I have (24" 6.5CM). Yeah, it's long with a suppressor on it...no getting around that. Here's a pic with it suppressed and one with it braked.

View attachment 313948
View attachment 313949

Is that roughtech with a different stock? What kind of velocities are you seeing?


Sent from my iPhone using Tapatalk

 

[Antares]

Is that roughtech with a different stock? What kind of velocities are you seeing?

Yes, it's a Roughtech in a McMillan Game Scout stock. It shoots the factory 140gr ELDM load very well. I get 2730 fps.

 

[mcr-85]

Lol don’t worry, I try to keep the shot at or under 500 yards. I have good glass (spotter and binos) so I’d hope I would know the difference between a mule and mule deer lol


Sent from my iPhone using Tapatalk

Just giving you shit. I knew what you meant.

Here is my suppressed Tikka.

Sent from my SM-G981V using Tapatalk

 

[KSTiger]

Just giving you shit. I knew what you meant.

Here is my suppressed Tikka.

Sent from my SM-G981V using Tapatalk

What’s the adapter you are using? And what suppressor?

Did you find a stock 6.5-284 or did you have it rebarreled?

 

[HandgunHTR]

Looks like you got your question answered, but I will add that with the machining tolerances being applied in today‘s suppressor and rifle manufacturing, you can get away with having less than the TBAC recommended shoulder. I have a couple barrels that mic at around .690 at the muzzle, have 5/8” threads and my suppressors fit on them (and thread up tight) every time.

 

[mcr-85]

What’s the adapter you are using? And what suppressor?

Did you find a stock 6.5-284 or did you have it rebarreled?

I use a Hughes Precision adapter 1/2-28 to 5/8-24. I have a Griffin Armament GP7 and a few Form 1 suppressors I shoot.

My tikka started life as a 6.5 Creedmoor and got rechambered to the 6.5x284. Same factory barrel.

 

[emmagator]

Bringing up old thread. Looking at putting a suppressor on my 6.5c Roughtech with 24” barrel. Those who have ran for awhile, is it too long!

I assume a good gunsmith can cut and thread a fluted barrel? But maybe not enough diameter to thread once cut down to say 22”?

 

[Bowfinn]

Bringing up old thread. Looking at putting a suppressor on my 6.5c Roughtech with 24” barrel. Those who have ran for awhile, is it too long!

I assume a good gunsmith can cut and thread a fluted barrel? But maybe not enough diameter to thread once cut down to say 22”?

I had my rough tech barrel cut to 18 in and threaded 5/8x24. The threading is in the fluting and it’s wasn’t a problem for my gunsmith. I have a 6.75 inch suppressor and I wouldn’t want my barrel longer than it is.

 

[HandgunHTR]

I have a D-18 listed in the classifieds. If it doesn't sell soon, I am going to yank the barrel off and have it chopped to 20" and threaded.

 

[emmagator]

I had my rough tech barrel cut to 18 in and threaded 5/8x24. The threading is in the fluting and it’s wasn’t a problem for my gunsmith. I have a 6.75 inch suppressor and I wouldn’t want my barrel longer than it is.

Good to know. Thanks

 

[PapaSmurf]

I had my rough tech barrel cut to 18 in and threaded 5/8x24. The threading is in the fluting and it’s wasn’t a problem for my gunsmith. I have a 6.75 inch suppressor and I wouldn’t want my barrel longer than it is.

Hello,

Do you happen to have any pictures of this? Thanks!

 

[Bowfinn]

Hello,

Do you happen to have any pictures of this? Thanks!

Yep! I’ll add pictures to this post.