Tikka prefits

[lintond]

PVA just turned around a prefit for me in two months. Arrives on Monday

I had them do their 2 wk rush order up charge on a 6 creed last summer and had it super quick in time for hunting.


Sent from my iPhone using Tapatalk

 

[TradLife406]

What did you have to do to make a Tikka six arc? I'm loving my gas Six. Would love to be able to load some hotter loads though. Would make a slick training gun too.
I have seen what is it? J&S has an arc tikka action. Is that the route you went? What about mags?


Sent from my iPhone using Tapatalk

 

[HandgunHTR]

What did you have to do to make a Tikka six arc? I'm loving my gas Six. Would love to be able to load some hotter loads though. Would make a slick training gun too.
I have seen what is it? J&S has an arc tikka action. Is that the route you went? What about mags?


Sent from my iPhone using Tapatalk

The easiest way is to either have a .223 bolt opened up, or have the standard bolt bushed down to accommodate the ARC/PPC rim diameter. Then put that action into a chassis and use ARC/Grendel AICS magazines.
If you want to do a "standard" stock arrangement, I would bet that some modification of the .223 bolt would allow for the use of the ARC/Grendel cartridges. I think there was a thread on here that had some discussion about that side of it.

 

[TradLife406]

So there is a way... I like it!


Sent from my iPhone using Tapatalk

 

[TradLife406]

Unknown needs to make an Arc tikka clone when they do their actions next year... [mention]Ryan Avery [/mention]


Sent from my iPhone using Tapatalk

 

[SamsonMan22]

I would buy another one from PVA without hesitation, I just wish they offered some lighter contours. My last one I paid for the 2 week rush and they missed it by one day and actually honored their guarantee and refunded the extra I paid. That particular barrel was a little picky on bullets but once I found what it liked it shot exceptionally well.

 

[Stache Attack]

A lot of local smiths are 3-6 weeks locally, chase fisher is one. I have another just north 2 miles that is quicker and does a lot of prs barrels. Your milling of flutes is your main issue. Chambering is quick and all smiths have a good lathe.

Local guys can be short or long waits depending on years in the game and orders… typically still faster than your big time smiths.

Keep in mind most spiral twist will be done on a cnc not by hand

 

[wind gypsy]

I would buy another one from PVA without hesitation, I just wish they offered some lighter contours.

they have that straight 0.680” contour now that’s pretty dang light!

 

[SamsonMan22]

they have that straight 0.680” contour now that’s pretty dang light!

You’re right I forgot about that one, I’m going with that for my next barrel from them.

 

[roosiebull]

I’m not in a big hurry, and not completely stuck on the arc, just want a low recoil 6mm for my daughter. I was just curious if some prefit options were faster than others

An 8 twist factory 243 isn’t out of the question, and 6creed isn’t either, I just want as little recoil as possible, and factory ammo options.

I have a 308 laying around without a real place in the world, and want to turn it into a gun that gets used more. I have options to get by this year, but want to get something going that she can use for everything

Appreciate the replies

 

[Nine Banger]

Pva is about to do their 1776 sale

Has anyone received their 1776 barrel yet?

 

[ResearchinStuff]

i did not order a PVA barrel this year, sorry.

 

[khuber84]

I would skip the bolt face work and just shoot a 6br, 6bra, 6dasher. Typical loads are 31.5 to 33gr with heavy bullets. This will give 6arc plus a lil extra velocity potential with temp stable powders like varget, 4895, rl15.5 8208xbr, N150 etc......

 

[bohem]

Has anyone received their 1776 barrel yet?

Almost everyone with the exception of one Tikka (I believe that's the only outstanding one) that had to be re-made because we made a mistake on features in production. I just finished fluting it yesterday. All the other machine work is done on it so it's shipping very shortly.

My best guess would be that it's your order, I apologize for the delay.

 

[Nine Banger]

Almost everyone with the exception of one Tikka (I believe that's the only outstanding one) that had to be re-made because we made a mistake on features in production. I just finished fluting it yesterday. All the other machine work is done on it so it's shipping very shortly.

My best guess would be that it's your order, I apologize for the delay.

Yep. Got your email. Thanks for reaching out.

 

[TradLife406]

PVA can make one in a week for $200 more


My mom took Tylenol when she was pregnant with me, but only when she was hung over