Castle Rock
WKR
- Joined
- Mar 28, 2020
- Messages
- 799
For those that have them, Do you like them? What’s the heaviest bullet you have had success with?
Mind sharing your 4831sc load and details?Mine shot fairly bad with H4350 and H1000. With multiple different bullets in the 105-112 grain range.
It finally started shooting decent with 108 ELD’s and H4831sc.
Mind sharing your 4831sc load and details?
Any gunsmiths you can recommend? ThanksGuys, take em to a decent smith and have em punch it out with more freebore. Loading long heavies in a short throat chambers isn't helping you at all. Since the 243 neck is shorter than a 6cm, I'd likely have it around 0.200" freebore. 243 saami spec is old, and sucks balls, doesn't even have freebore, just lead angle taper, thay will give you about 0.07-0.08 of bearing surface forward before you're jamming lands. 6cm has 183fb and another 0.030 linger neck. Stuffing bullets way below the neck doesn't help accuracy. View attachment 737748
Kinport Peak Rifles or Kamfeld Customs in Idaho, Manzella Precision in Montana. I have hand uni-throaters from PTG, 22 6 65 7 and 30 cal. I can do all my own, but they are not as clean as if done on a lathe.Any gunsmiths you can recommend? Thanks
Load details pleaseMine hammers with h4350 and a 108eldm at 2900fps out of a 20” barrel. They are short throated
Orange leaves are a nice touch
Work up with h4350. I’m loading 2.800” oal.Load details please
I’m running 2690fps out of a 17” tikka with 108s and 47gr of h1000. I got more speed from the 4350 but the h1000 gave better accuracy. Everything is loaded to standard tikka mag length. I’ve been very happy with this setup.
Sent from my iPhone using Tapatalk