MarcherLord
FNG
Thats not too bad. Looks to be within about 75-100 fps of advertised velocities.
This has been what I've encountered across a span of 7-8 Tikkas. I consider it a fair trade for how trouble free they have been.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thats not too bad. Looks to be within about 75-100 fps of advertised velocities.
My experience with my 6.5 tikka superlite 24.3” is 2596 with factory 143 ELDX.
I believe in the 6.5C model specifically it is due to the chamber being long. When I measure with my 143 and OAL gauge and comparator I get my lands at 2.945”. The factory loads are loaded to SAAMI length and that’s a big jump and a lot of room for expansion.
If I load to 2.94” and use a slower powder like RL26 or Superformance I have easily been getting 2900fps with handloads and no pressure signs. My buddy with the same gun has done the same load up.
So maybe a curse (but they still shoot great) for speed in the factory stuff but pretty awesome for folks that are willing to load longer with handloads. Obviously the magazine in the 6.5C supports the longer loads too (2.97” is what mine will hold).
This has been what I've encountered across a span of 7-8 Tikkas. I consider it a fair trade for how trouble free they have been.
Send PM, but yes 143 handloads loaded to lands minus .01". Factory was right at 2600.Youre getting 2900 with 143 eldx? Or is that with a 120 gr bullet?
I averaged 2591 fps for five shots with 143 gr Hornady Precision Hunters out of my 22.4” Tikka T3X Lite (6.5CM).
Doesn’t the 6.5 Tikka have either a 24.3” or a 20” on the compact model ?
My experience with my 6.5 tikka superlite 24.3” is 2596 with factory 143 ELDX.
I believe in the 6.5C model specifically it is due to the chamber being long. When I measure with my 143 and OAL gauge and comparator I get my lands at 2.945”. The factory loads are loaded to SAAMI length and that’s a big jump and a lot of room for expansion.
If I load to 2.94” and use a slower powder like RL26 or Superformance I have easily been getting 2900fps with handloads and no pressure signs. My buddy with the same gun has done the same load up.
So maybe a curse (but they still shoot great) for speed in the factory stuff but pretty awesome for folks that are willing to load longer with handloads. Obviously the magazine in the 6.5C supports the longer loads too (2.97” is what mine will hold).