The REAPER from Unknown Suppressors

[Salmon River Solutions]

Any precision testing? Will SRS make a brake for it?

I can't tell but will the front cap take Bravo threads or the SRS 2 port brake?

will this have a muzzle brake option for it?

Tag us when asking, I didn't even know this thread existed.

It is the 1.8" diameter... so our brake we have on the website currently will fit it. This does require the can to be shimmed, but we include shims with the brake.

We are working on a self timing setup for the brake but haven't quite figured it out yet.

Ken

 

[JGRaider]

Where did you find dBA ratings for the AB Raptor 8 (with or without reflex)? They are not listed on AB's website. AB would not tell me them when I called to ask. And they are not on the TBAC Summit or Pew Science.

There was a guy here that did some testing with the new OG and several others including the AB8. IIRC it tested in the low 130db range but I could be mistaken. It was significantly quieter than the new OG can.

 

[cuerro viejo]

There was a guy here that did some testing with the new OG and several others including the AB8. IIRC it tested in the low 130db range but I could be mistaken. It was significantly quieter than the new OG can.

Reaper would be a better comparison to AB 8,

OG is 4” so it compares to AB 2 @ 3.9” and AB 4 @ 4.7”

Reaper with 3” reflex makes a lot of sense… I’ll take one in .75 config if it retains 1.8 full diameter reflex. Think it would beat Raptor 8

 

[nobody]

My dad and I are in the market for our first suppressors. We wanted a scythe TI without the durability question marks. This just moved to the top of the list.


Now to wait…

 

[khuber84]

Have a Pic of the end cap prior to the high temp integrity test? I'd like to see if the distortion of the end cap muzzle exit was also convex shaped, or if the material was reshaped from heat and pressure.

 

[doc holiday13]

Tag us when asking, I didn't even know this thread existed.

It is the 1.8" diameter... so our brake we have on the website currently will fit it. This does require the can to be shimmed, but we include shims with the brake.

We are working on a self timing setup for the brake but haven't quite figured it out yet.

Ken

So i guess I should have been more specific in my response. It seems like you're referring to having a muzzle attachment type brake for the suppressor to thread on to.

What I was asking(sorry for my lack of clarity), will the suppressor have a brake option? Much like the TBAC Magnus(directional) or Silencerco Harverster (radial type brake)

 

[Bluefish]

Have a Pic of the end cap prior to the high temp integrity test? I'd like to see if the distortion of the end cap muzzle exit was also convex shaped, or if the material was reshaped from heat and pressure.
View attachment 916982

I believe they said it did get distorted from heat as its aluminum?

Now I want one and I thought I was done buying cans for a while.

 

[wind gypsy]

So i guess I should have been more specific in my response. It seems like you're referring to having a muzzle attachment type brake for the suppressor to thread on to.

What I was asking(sorry for my lack of clarity), will the suppressor have a brake option? Much like the TBAC Magnus(directional) or Silencerco Harverster (radial type brake)

Assumed Ken @Salmon River Solutions was referring to this:

Directional Suppressor Brake – Salmon River Solutions

The OG L has threads, so we're going to use them!

www.salmonriversolutions.com

 

[wind gypsy]

For the folks wanting reaper + 3” reflex, it seems like that’d be pretty dang heavy considering the OGL is 4”+4” and weighs 15 ounces. 6”+3” might be even heavier?

 

[Q_Sertorius]

For the folks wanting reaper + 3” reflex, it seems like that’d be pretty dang heavy considering the OGL is 4”+4” and weighs 15 ounces. 6”+3” might be even heavier?

True. I already bought rather hefty AB suppressors that fill this role. But, if US had offered an equivalent 3d printed design, I would have bought from them.


____________________
“Keep on keepin’ on…”

 

[Tmcgarrigle]

Yes it looks like it will

So i guess I should have been more specific in my response. It seems like you're referring to having a muzzle attachment type brake for the suppressor to thread on to.

What I was asking(sorry for my lack of clarity), will the suppressor have a brake option? Much like the TBAC Magnus(directional) or Silencerco Harverster (radial type brake)

 

[khuber84]

Ab reflex mounts are hub thread I believe? Pretty sure Ryan has a raptor. Why don't the make a Frankencan. Reaper with some flex! Test that shit out!

 

[B_Reynolds_AK]

I shot Form’s Reaper back to back with my 22 CM/ Scythe combo. Very similar sound, ie. both sound great to me, but without the worry about a catastrophic failure. A Lot of people are going to want this can.

 

[Bluefish]

Ab reflex mounts are hub thread I believe? Pretty sure Ryan has a raptor. Why don't the make a Frankencan. Reaper with some flex! Test that shit out!

Unfortunately the reflex is not hub mount. It’s bigger. Proprietary thread or one not used by anyone else.

 

[Q_Sertorius]

Ab reflex mounts are hub thread I believe? Pretty sure Ryan has a raptor. Why don't the make a Frankencan. Reaper with some flex! Test that shit out!

The Reaper is 1.8” in diameter. The AB cans are 1.625” in diameter.


____________________
“Keep on keepin’ on…”

 

[RWT]

So if size matters. I still prefer to think of it as how I use it.
If the Reaper could have a 3” reflex it I would put it ahead of the AB am Magnus for purchase. At this time I want max suppression for training. Then switch to my hunting can a month before season starts.

 

[WeiserBucks]

At this time I want max suppression for training. Then switch to my hunting can a month before season starts.

If max suppression is the #1 priority you want the biggest muffler you can get, AKA huge 338 type can.

 

[khuber84]

So if size matters. I still prefer to think of it as how I use it.
If the Reaper could have a 3” reflex it I would put it ahead of the AB am Magnus for purchase. At this time I want max suppression for training. Then switch to my hunting can a month before season starts.

Max supression 9"+, fat diameter can. No compromises. Unless for muzzle forward of a reflex can is at least 8", it'll never hang with a big long forward muzzle supressor.

 

[SteveAndTheCrigBoys]

Max supression 9"+, fat diameter can. No compromises. Unless for muzzle forward of a reflex can is at least 8", it'll never hang with a big long forward muzzle supressor.

Generally agree with one exception. The Nomad Ti XC hangs pretty well with the 8"+ cans at 6.75"

 

[Bluefish]

The Reaper is 1.8” in diameter. The AB cans are 1.625” in diameter.


____________________
“Keep on keepin’ on…”

True, but the reaper necks down to a hub mount which is smaller than 1.625. Imho the 1.8” diameter helps make it quiet and short. The scythe is 1.7”? I want a reaper and will be ordering one.