The 22 creedmoor thread

[waspocrew]

Thank you for this. How many grains of varget? I haven’t tried it yet as it didn’t have the speed max the other powders did in the loading manual. I’m on a 1:8 twist PBB in a tikka action 18”.


Sent from my iPhone using Tapatalk

I’m at 39 gr of Varget (which is close to max if I recall correctly). Shoots very well.

 

[rugerhoyt]

I’m at 39 gr of Varget (which is close to max if I recall correctly). Shoots very well.

View attachment 1081959

Thanks!

you are right at max, but pushing quite a bit faster than the book velocity out of a 24" barrel. Thats good to see.

 

[TradLife406]

If they're already necking down 6 peak brass... when can how do we start taking it to 22 creed?

 

[naked wombats]

Inquiring minds also wanna (maybe) blow up bullets here

 

[rugerhoyt]

The way the folks at SAC sounded you could do it now?Just needed the bushing.


Sent from my iPhone using Tapatalk

 

[wind gypsy]

I’m at 39 gr of Varget (which is close to max if I recall correctly). Shoots very well.

View attachment 1081959

What a freakin laser.

 

[waspocrew]

What a freakin laser.

At that speed, it’s pretty much point and shoot to 300 yards on coyotes (1.3 minutes of drop at 300 from 100 yard zero). Makes it nice for thermal hunting!

 

[TradLife406]

Anyone improved their 22's?

Was annealing brass today and was like dang that shoulder is lacking. Basically the other two things are shoot are improved.

Ha yeah probably over kill. But then I remember Form playing with 22 UM.

Already pushing 88's at 3072. Another 100 fps plus could be fun!

Anyone know the process to get a non standard/uncommon improved round improved? And dies made?

 

[Huntnpack 2]

22 Creedmoor AI?

Has anyone done one of these? Care to share any info? Phil.

forum.accurateshooter.com

 

[waspocrew]

Anyone improved their 22's?

Was annealing brass today and was like dang that shoulder is lacking. Basically the other two things are shoot are improved.

Ha yeah probably over kill. But then I remember Form playing with 22 UM.

Already pushing 88's at 3072. Another 100 fps plus could be fun!

Anyone know the process to get a non standard/uncommon improved round improved? And dies made?

There's a dude on longrangehunting.com that posts about a 22 Creed AI occasionally - can't recall his username at the moment. Not sure if the juice is worth the squeeze on it, but you only live once!

Basically, you'd be looking at ordering a custom reamer (or shopping for a smith who has one on hand already). If you go with the reamer, I believe you can have custom dies cut with it OR typically send some fired brass to a die manufacturer (I think Hornady, Lee, and likely a few others will make dies for you).

The costs start to add up, but I totally get the desire to tinker with stuff.

 

[Huntnpack 2]

Anyone improved their 22's?

Was annealing brass today and was like dang that shoulder is lacking. Basically the other two things are shoot are improved.

Ha yeah probably over kill. But then I remember Form playing with 22 UM.

Already pushing 88's at 3072. Another 100 fps plus could be fun!

Anyone know the process to get a non standard/uncommon improved round improved? And dies made?

Let’s get em going on the 22 CM + Peak !!

C’MON ……Let’s Go !!!!

I just submitted a request to Federal on their web page for 22 CM + Peak.
Feel free to do the same.
Gotta start somewhere. !!

 

[Kaleb]

As far as I'm concerned the 22cm is improved. From 22-250 to improved was a bump. I doubt you'd see 100fps going from 22cm to improved. That said I'm the last guy to discourage someone from playing though. I just doubt the juice is worth the squeeze.

 

[glock233]

Let’s get em going on the 22 CM + Peak !!

C’MON ……Let’s Go !!!!

I just submitted a request to Federal on their web page for 22 CM + Peak.
Feel free to do the same.
Gotta start somewhere. !!

They’d do 22 arc but 22 creed doesn’t make sense.

 

[omicron1792]

They’d do 22 arc but 22 creed doesn’t make sense.

I like the idea.

According to this reasoning the 6um makes no sense.