The 22 creedmoor thread

[BBob]

I don’t think it is

The ones I've handled are not, nether is the one in hand at the moment.

 

[Lawnboi]

I did when doing some load development. Only had it happen with H4350.


Sent from my iPhone using Tapatalk

Same, only with h4350.

Those are noticeable hang fires. I also don’t want to increase lock time that’s unnoticeable.

I have seen hang fires with 6 creed as well in srp brass.

 

[TradLife406]

With the better availability of large rifle primers is there any reason not to just use those?

I know a year ago or more smalls were definitely easier to find.

 

[jk_minn]

Same, only with h4350.

Those are noticeable hang fires. I also don’t want to increase lock time that’s unnoticeable.

I have seen hang fires with 6 creed as well in srp brass.

What brand brass and primer?

 

[Lawnboi]

What brand brass and primer?

Alpha, cci450

 

[Lawnboi]

With the better availability of large rifle primers is there any reason not to just use those?

I know a year ago or more smalls were definitely easier to find.

In a 22 creedmoor in premium brass? Absolutely not. Large rifle primers are normally thicker and seem to be even more resistant to primer flow than any small rifle primers if used.

 

[BBob]

With the better availability of large rifle primers is there any reason not to just use those?

No reason at all not to use it unless you buy into the idea that SRP’s are or can be more accurate or can handle more pressure. This is a field rifle, go for what’s going to go bang every time.

 

[Moose83]

View attachment 980066

Gonna need a whole roll of thread for that one...lol

 

[prcwv]

View attachment 980066

I love my Creedmoor but the 100 ELDVT out of 6.5 prc at 3500 is nasty lol. I got some 69 ELDVTs for my 22 Creedmoor that I wanna try.

 

[KHntr]

I love my Creedmoor but the 100 ELDVT out of 6.5 prc at 3500 is nasty lol. I got some 69 ELDVTs for my 22 Creedmoor that I wanna try.

Back in the day I chopped a couple in half with my 300 Ultra and 130gr NBT going Mach Chicken. Those ones needed a roll of thread AND spare hide.

 

[prcwv]

Back in the day I chopped a couple in half with my 300 Ultra and 130gr NBT going Mach Chicken. Those ones needed a roll of thread AND spare hide.

I have a smokeless muzzleloader shooting 250gr bullets 2952fps you dont know how bad I want to see one while im out lol. Look up coyote 50 cal on YouTube most brutal thing ive seen lol