Thank you Form I’m now a mk12 believer

[McD18]

Do y'all recommend a 1-7 or 1-8 twist?

 

[walk2112]

Do y'all recommend a 1-7 or 1-8 twist?

FWIW I like 1:7 when in a shortish (14.5” to 18”) barrel. Would love to hear PRI owners experience though on how 1:8 does accuracy wise with 77 tmk’s or similar vs 1:7 if they’ve been able to observe both

 

[Formidilosus]

FWIW I like 1:7 when in a shortish (14.5” to 18”) barrel. Would love to hear PRI owners experience though on how 1:8 does accuracy wise with 77 tmk’s or similar vs 1:7 if they’ve been able to observe both

There’s no difference that 1:7” or 1:8” twist makes on accuracy. The difference is just barrel to barrel variability.

 

[JF_Idaho]

I'm trading a rifle I've had sitting around for a Mk12. Thinking about a (2)2.5-10.

Tough decision. Need some advice.

Credo 2-10x36 w/ no parallax (ffp mil)
Vs trying to chase down an NXS 2.5-10x36 but sfp (mil).

Any other recs sub 1500ish ?

Trying to keep it mk12ish but not too nerdy. Throwing a aem5 on there also.

PRI 18" 1:7 on a BCM lower

 

[Formidilosus]

I'm trading a rifle I've had sitting around for a Mk12. Thinking about a (2)2.5-10.

Tough decision. Need some advice.

Credo 2-10x36 w/ no parallax (ffp mil)
Vs trying to chase down an NXS 2.5-10x36 but sfp (mil).

Any other recs sub 1500ish ?

Trying to keep it mk12ish but not too nerdy. Throwing a aem5 on there also.

PRI 18" 1:7 on a BCM lower

SWFA 3-9x, SWFA 3-15x Gen 2.

 

[wind gypsy]

I'm trading a rifle I've had sitting around for a Mk12. Thinking about a (2)2.5-10.

Tough decision. Need some advice.

Credo 2-10x36 w/ no parallax (ffp mil)
Vs trying to chase down an NXS 2.5-10x36 but sfp (mil).

Any other recs sub 1500ish ?

Trying to keep it mk12ish but not too nerdy. Throwing a aem5 on there also.

PRI 18" 1:7 on a BCM lower

Why not just just a 42mm obj NXS?

 

[JF_Idaho]

SWFA 3-9x, SWFA 3-15x Gen 2.

Definitely considering.

Why not just just a 42mm obj NXS?

Not out of the question. If I can track one down used at the right price. Market is a little higher than my budget.

I really feel like the Credo with a side-focus would be the ideal "dmr" scope.

 

[77TMK]

I'm trading a rifle I've had sitting around for a Mk12. Thinking about a (2)2.5-10.

Tough decision. Need some advice.

Credo 2-10x36 w/ no parallax (ffp mil)
Vs trying to chase down an NXS 2.5-10x36 but sfp (mil).

Any other recs sub 1500ish ?

Trying to keep it mk12ish but not too nerdy. Throwing a aem5 on there also.

PRI 18" 1:7 on a BCM lower

Used NX8 2.5-20. They show up time to time. In use they're closer to a 2.5-12 for real use. The Leupold MK5HD 3.6-18 and the 2-10 are both showing up often under $1500 with full warranties.

 

[Hunthigh1]

Excuse the dumb question. . . I am learning the AR 15 stuff. Can a guy put a MK12 MOD 0 PRI upper on any decent lower and expect the same accuracy you are observing?

I have an Aero Precision M4E1 lower that I am considering getting an accurate barrel or upper for. Currently, the rifle I own has all Aero Precision parts and a Ballistic advantage 1-7 twist barrel. I am not satisfied with the accuracy and wondering the best way to achieve a 1MOA AR15. . . The results the OP posted are impressive.

 

[Formidilosus]

Excuse the dumb question. . . I am learning the AR 15 stuff. Can a guy put a MK12 MOD 0 PRI upper on any decent lower and expect the same accuracy you are observing?

Yes.

 

[JF_Idaho]

Yes. Just add a good trigger.

 

[slowelk]

Definitely considering.



Not out of the question. If I can track one down used at the right price. Market is a little higher than my budget.

I really feel like the Credo with a side-focus would be the ideal "dmr" scope.

No parallax on a 2.5-10 is not a big deal. I have the Credo you reference and it does fine 1k and and in.

 

[6.5x284]

No parallax on a 2.5-10 is not a big deal. I have the Credo you reference and it does fine 1k and and in.

I’m torn between the Credo 2.5-10 and the newer Credo 1-10. Waiting to see if anything new from NF comes out at shot though.


Sent from my iPhone using Tapatalk

 

[cmo5t]

Nice rifle! You absolutely have to get the AEM5 can for this. One of the best cans of all time and just such a fun shooting setup. Also, check out the 15.1” NSW RECCE config w/ the KAC FF RAS long hand guard. Hands down my favorite upper…

 

[JF_Idaho]

Picked her up



PRI 18
BCM Lower
60° lever
Geissle Trigger
Armaspec captive spring/buffer

Unfortunately he forgot the thread protector. Gonna throw an athlon 3-12 mil dot I have laying around on it until I figure out glass.

My ignorance on private party transfer of a can has led me to realize that isn't happening for the aem5. Now I am considering an ocm5 which I can get locally.

Anyone have any insight on the ocm5?