Target stand-lightweight

[lak2004]

Has anyone made a gong target stand out of some pvc so it's light and packable?

 

[Elite]

Following


Sent from my iPhone using Tapatalk

 

[SlimCreaper25]

How light weight do you need? I use these with a handful of t posts and they work great. These are like 15$ on eBay and a 5$ t post

 

[EdP]

A target stand for a gong needs to be heavy enough to not get knocked over OR needs to be anchored. It also needs to withstand the bullet splatter. I think that is why most stands are steel. I made one from old bed frame angle iron with a 2x4 base that stakes down but the 2x4s also get eaten up by bullet splatter. The range I shoot at had gongs hanging at 400 yds off a 6x6 timber mounted on 6x6 posts. After about 1 year the top 12" of one of the posts was gone from splatter.

 

[Grecco]

I have mad some out of electrical conduit. I made 3 prong corner pieces 2 prongs for legs and 1 for a cross member. I welded up out of square tubing. A while later I found these that look easier. https://shootingtargets7.com/products/kyl-target-leg-brackets

 

[Marshfly]

Your best bet is to use a loop of cable with a carabiner for the gong and either wrap around a tree branch or over the top of a boulder. See THLR YouTube vids for how he does his when he hikes in.

 

[lak2004]

Your best bet is to use a loop of cable with a carabiner for the gong and either wrap around a tree branch or over the top of a boulder. See THLR YouTube vids for how he does his when he hikes in.

That's a good idea, thanks!

 

[Castle Rock]

Just screw it to a tree