T3x superlite roughtech

[HalfmanB]

I’m looking at getting a 300 wm tikka. Was going to get t3x lite roughtech ember, but now seeing on eurooptic the t3x superlite option. It’s a crappy pic on their site of the coyote cerakoted one and I can’t seem to find my pics of info of this gun anywhere else? Didn’t know if it’s an exclusive? Also doesn’t state barrel threads. Assuming it’s 5/8x24?

Anyone have any experience with this gun or info? They list it 1 lb lighter as well but not sure if that is correct? Any help or info is appreciated! Little hesitant to buy without being able to see or get any other info!

 

[matthewmt]

My roughtech 300wm is 5/8 but if it's superlite profile may be 1/2x28

Sent from my SM-G973U using Tapatalk

 

[jamesmc8]

From researching it a bit the threads are euro M15x1 which is better than either 1/2x28 or 9/16 but just slightly less than 5/8. They come with an adapter for 5/8x24 which probably adds 1/2 to the length.

 

[Spence14]

Saw this post as I was trying to figure out the same thing. As @jamesmc8 mentioned, the eurooptic rep told me he believed they were 15x1 but was going to reach out to his tikka rep to confirm.

I just measured the adapter, it adds about 3/4" and looks a little funny with a 5/8x24 brake.

 

[thrashero]

Saw this post as I was trying to figure out the same thing. As @jamesmc8 mentioned, the eurooptic rep told me he believed they were 15x1 but was going to reach out to his tikka rep to confirm.

I just measured the adapter, it adds about 3/4" and looks a little funny with a 5/8x24 brake.

Did Eurooptic confirm the threading?

 

[Ramblr]

I would like confirmation on the threading too. Thunderbeast has a mount for M15x1 threads, so no adapter needed.

 

[Spence14]

Did Eurooptic confirm the threading?

Yep I installed the m15x1 micro bastard a few weeks ago by APA

 

[Spence14]

I would like confirmation on the threading too. Thunderbeast has a mount for M15x1 threads, so no adapter needed.

Yep! M15x1

 

[Ramblr]

Yep I installed the m15x1 micro bastard a few weeks ago by APA

PICS!

 

[BlackDuckNH]

Anyone get their hands on one? Curious if they are actually as light as stated on Europtic (5.8-6lbs -ish). The roughtech superlite model still isn't listed on tikkas website

 

[Spence14]

Anyone get their hands on one? Curious if they are actually as light as stated on Europtic (5.8-6lbs -ish). The roughtech superlite model still isn't listed on tikkas website

Yes and yes. I'm around 9.5 lbs with scope and bipod

 

[6.5284 Guy]

I was just looking at one of these too. Anyone shot one? Seems like a great light rifle

 

[Spence14]

I was just looking at one of these too. Anyone shot one? Seems like a great light rifle

I've got about 300 rounds through mine. Great rifle so far.

 

[6.5284 Guy]

I've got about 300 rounds through mine. Great rifle so far.

I have wanted a Seekins Element for a long time but it seems like one of these would be a similar weight, similarly accurate for about half the cost. Not to mention the aftermarket support

 

[alexanderg23]

I've got about 300 rounds through mine. Great rifle so far.

Is the Superlite roughtech ember stainless that is cerakoted or blued then cerakoted?

 

[Forrest.billy]

FYI, some of these are marked down to $999 at europtics plus the $75 rebate. Some calibers have the shorter 20” threaded barrels and are the 16mm barrel profile compared to the 18mm contour on other fluted models.

 

[PapaSmurf]

FYI, some of these are marked down to $999 at europtics plus the $75 rebate. Some calibers have the shorter 20” threaded barrels and are the 16mm barrel profile compared to the 18mm contour on other fluted models.

Wow thanks for the heads up!

 

[6.5284 Guy]

FYI, some of these are marked down to $999 at europtics plus the $75 rebate. Some calibers have the shorter 20” threaded barrels and are the 16mm barrel profile compared to the 18mm contour on other fluted models.

Thank you!