T & K Suppressors Altus™ and Vorix™

[TandKHunting]

T & K Suppressors — ALTUS™ 30 vs VORIX™ 30 (3D-Printed Titanium .30 cal cans)

Deposits are currently being taken for cans shipping end of February - Early March - TANDKSUPPRESSORS.COM

---

ALTUS™ 30 — Compact. Lightweight. Purpose-Built.​

The ALTUS 30 is a compact, 3D-printed titanium suppressor built for shooters who prioritize balance, weight, and real-world usability without sacrificing meaningful sound reduction.

Built using additive manufacturing, the ALTUS uses monolithic internal geometry to optimize gas flow and pressure staging beyond what traditional stacked/welded baffle designs can typically achieve. The result is strong suppression in a shorter, lighter package — ideal for hunting rifles, field guns, and anyone who values mobility.

On subsonic bolt-action platforms, ALTUS provides solid peak muzzle reduction while staying light and well-balanced at the end of the barrel. On higher-pressure platforms like 5.56 NATO, it performs like a compact suppressor should — reducing blast and concussion without excessive length or backpressure.

ALTUS 30 is rated up to magnum cartridges, making it a versatile “one can does it all” option without committing to a full-length suppressor.

Included with every ALTUS 30: a premium Kilo™ or X Tango™ suppressor cover and direct thread mount of your choice.

ALTUS 30 is for shooters who want premium performance in a streamlined, carry-friendly suppressor.

---

VORIX™ 30 — Maximum Suppression. No Compromises.​

The VORIX 30 is our quietest 3D-printed titanium suppressor, engineered for shooters who want maximum suppression across a wide range of platforms — from subsonic bolt guns to hard-use 5.56 rifles and magnum calibers.

Compared to ALTUS, VORIX has increased length, internal volume, and baffle count. That added volume holds and manages gas longer, resulting in noticeably greater sound reduction (especially on high-pressure cartridges). Pressure decays more smoothly, creating a softer impulse and improved shooter experience.

On subsonic bolt guns, VORIX delivers exceptional peak muzzle reduction and lands in the same performance class as today’s top-tier additive titanium suppressors. On 5.56, it provides strong suppression without the excessive backpressure commonly associated with overly restrictive designs.

Like ALTUS, VORIX is fully 3D-printed titanium (no welds, no stacked tolerances), enabling complex internal geometry that traditional construction can’t replicate — built for consistency, durability, and long-term performance.

Included with every VORIX 30: a premium Kilo™ or X Tango™ suppressor cover and direct thread mount of your choice.

VORIX 30 is for shooters who want the quietest, most capable suppressor in the lineup and are willing to carry a bit more length/weight to get it.

---

Highlights (Both ALTUS + VORIX)​

• Fully 3D-printed titanium construction
• DLC heat-treated finish (durability / wear resistance / high-temp performance)
• Optimized gas management (reduce blowback without excessive backpressure)
• Broad platform performance (subsonic, 5.56, and magnum cartridges)
• Premium suppressor cover included (bolt-action use only)

---

Specifications — ALTUS™ 30​

Material: Titanium
Weight: 7.3 oz
Length: 5.75 inches
Diameter: 1.5 inches
Minimum barrel length: 10.3 inches
Rear interface: 1.375×24 HUB (Bravo)
Direct-thread options: 1/2×28, 5/8×24
Caliber range: .30-cal projectiles and smaller
Full-auto rating: 90 rounds with 10-minute cooldown
Cleaning: Simple Green (1:4) soak or ultrasonic (no heat)

---

Specifications — VORIX™ 30​

Material: Titanium
Weight: 11.3 oz
Length: 7.5 inches
Diameter: 1.5 inches
Minimum barrel length: 10.3 inches
Rear interface: 1.375×24 HUB (Bravo)
Direct-thread options: 1/2×28, 5/8×24
Caliber range: .30-cal projectiles and smaller
Full-auto rating: 90 rounds with 10-minute cooldown
Cleaning: Simple Green (1:4) soak or ultrasonic (no heat)

---

Sound Test Data (LZpeak — peak impulse)​

.308 Winchester (Hornady 168gr) — 22" Bolt Action (Tikka)​

Unsuppressed: ~165 dB
• ALTUS — Muzzle: 139.6 dB (~25 dB reduction)
• VORIX — Muzzle: 133.1 dB (~32 dB reduction)
• ALTUS — Shooter’s ear: 129.9 dB (~35 dB reduction)
• VORIX — Shooter’s ear: 123.5 dB (~41 dB reduction)

7.62×39 Subsonic — 14.5" Bolt Action​

Unsuppressed: ~160 dB
• ALTUS — Muzzle: 134.7 dB (~25 dB reduction)
• VORIX — Muzzle: 121.7 dB (~38 dB reduction)
• ALTUS — Shooter’s ear: 125.2 dB (~38 dB reduction)
• VORIX — Shooter’s ear: 119.0 dB (~41 dB reduction)

5.56 NATO (M4A1) — 14.5" Gas-Operated Rifle​

Unsuppressed: ~168 dB
• ALTUS — Muzzle: 144.3 dB (~24 dB reduction)
• VORIX — Muzzle: 136.9 dB (~31 dB reduction)
• ALTUS — Shooter’s ear: 137.0 dB (~31 dB reduction)
• VORIX — Shooter’s ear: 133.9 dB (~34 dB reduction)

.300 Weatherby Magnum (180gr, very high velocity) — 26" Bolt Action (Weatherby)​

Unsuppressed (typical): 168–172 dB
• ALTUS — Muzzle: 146.1 dB
• VORIX — Muzzle: 144.2 dB
• ALTUS — Shooter’s ear: 139.2 dB
• VORIX — Shooter’s ear: 131.5 dB

Testing note: Peak impulse sound measurements (LZpeak) recorded approximately 3 ft left of the muzzle and 6 inches right of the shooter’s ear. Unsuppressed levels represent typical centerfire rifle impulse noise for comparable platforms. Results may vary based on firearm, ammunition, barrel length, and environmental conditions.

 

[Geewhiz]

Price??

I would be interested to hear some user feedback.

 

[TandKHunting]

Price??

I would be interested to hear some user feedback.

The VORIX is $1399 and comes with a mount, suppressor cover, and we are offering new customer 10% off discount.

The ALTUS is $1050 and comes with a mount, suppressor cover, and we offer the same new customer 10% off.

We are currently working with ROKSLIDE to get a review article done on them. I will be talking with @robby denning at Western Hunt. We will have cans there for guys to check out and put deposits down on.

 

[Geewhiz]

The VORIX is $1399 and comes with a mount, suppressor cover, and we are offering new customer 10% off discount.

The ALTUS is $1050 and comes with a mount, suppressor cover, and we offer the same new customer 10% off.

We are currently working with ROKSLIDE to get a review article done on them. I will be talking with @robby denning at Western Hunt. We will have cans there for guys to check out and put deposits down on.

Why would I buy one of these over any number of other 3d printed Ti cans like CAT, SAW, PTR, Airlock, etc.? What stands out?

Give us a sales pitch.

 

[TandKHunting]

Why would I buy one of these over any number of other 3d printed Ti cans like CAT, SAW, PTR, Airlock, etc.? What stands out?

Give us a sales pitch.

What ultimately separates our suppressors from many others in the same 3D-printed titanium space is that we’re publishing unweighted LZpeak impulse data, including shooter’s-ear averages, and those numbers are still competitive at the very top of the category. LZpeak captures the raw peak pressure of the gunshot in microseconds and can’t be filtered, averaged down, or massaged to look better, which makes it a far more demanding metric than dBA or composite scores. When strong results show up under LZpeak, it’s not because of marketing or test conditions — it’s a direct reflection of internal geometry, gas path design, and pressure management inside the suppressor. In other words, the performance you see is coming from engineering choices that shape and delay the pressure wave before it ever reaches the shooter, not from how the sound is measured.

Obviously, we can talk customer service, warranty, and other stuff, but if you want science based data we have it.