Suppressor for short barrel 6.5 prc?

[Hunter609]

Are there any decent suppressors that will hold up to a 16” 6.5 prc?

 

[ChrisAU]

OCL Polonium 30. Tested on a 12” 300WM. Bit on the heavy side, but you are eliminating the UL options, for warranty anyway. Though I believe the Scythe TI has no barrel restrictions? Also has a thread of damaged suppressors, though that may be fixed now.

 

[Pilsner]

Using a Banish Backcountry on an 18" 6.5 PRC without issue. Factory Hornady fodder. I can't image that a 16" would be much different but I could be wrong...

 

[mtnbound]

Are there any decent suppressors that will hold up to a 16” 6.5 prc?

I have an Unknown Suppressor’s OG on my 17” 6.5Prc.

 

[Q_Sertorius]

Are there any decent suppressors that will hold up to a 16” 6.5 prc?

The OG and the Reaper.


____________________
“Keep on keepin’ on…”

 

[tikkashooter88]

I have an Otter Creek Labs Hydrogen S 6.5 on my 18" PRC and it's freaking awesome.

 

[pdjp1220]

Banish Backcountry works good

 

[307_timberstalker]

I can’t tell you what WILL work but from personal experience I can tell you the Abel co. Theorem S is a no go. Bout for my 18” 25 saum and it’s louuuud. When shooting with the brake end cap it might as well just be a 3 port normal brake it’s so loud. Worst buyers remorse I’ve had in a very long time. And I own a ultra7 so the bar was set high to begin with

 

[Oldffemt]

I have an Otter Creek Labs Hydrogen S 6.5 on my 18" PRC and it's freaking awesome.

I’ve been considering this can for an 18” 6.5” prc as well. Picked up a DD enticer s earlier this summer but haven’t gotten my prc barrel back from the smith yet. I originally planned to use the enticer on my son’s 6.5 creed. That barrel is at a different smith right now but should be heading back my way soon.

 

[Tigerrver]

I use a TBAC Magnus S RR on my 18 inch.

 

[Judd]

I'm running a Q Half Nelson on a 16" saum and I've been very impressed...not as light as some of the others but it's tough enough to take that abuse and does it quietly.

Unknown Reaper would be on my list to try, just not been around one yet. I haven't checked their barrel restrictions but the Dead Air Nomad XC Ti would also be on my list to try.

 

[wind gypsy]

I'm running a Q Half Nelson on a 16" saum and I've been very impressed...not as light as some of the others but it's tough enough to take that abuse and does it quietly.

Unknown Reaper would be on my list to try, just not been around one yet. I haven't checked their barrel restrictions but the Dead Air Nomad XC Ti would also be on my list to try.

They dont offer useful barrel restrictions for the actual target customer of the XC. They say 12.5" supersonic (556) and 6" for subsonic (300BO) and they list an muzzle energy metric of 4400 foot/lb.

 

[Judd]

They dont offer useful barrel restrictions for the actual target customer of the XC. They say 12.5" supersonic (556) and 6" for subsonic (300BO) and they list an muzzle energy metric of 4400 foot/lb.

16" 6.5prc w/ 156's running 2875 (I don't believe you'd be able to get that speed anyway) will be well under that ft/lb...what am I missing?

 

[wind gypsy]

16" 6.5prc w/ 156's running 2875 will be well under that ft/lb...what am I missing?

That there's a big gap between 12.5" 556 and a 12.5" barrel producing 4000 ft/lb of energy that isn't clarified.

 

[Judd]

I wouldn't hesitate to send it

 

[AirlockIndustries]

The Zero Gravity 6.5 is rated for 16" 6.5 PRC.

 

[mother_plucker]

Are there any decent suppressors that will hold up to a 16” 6.5 prc?

No problem with the Q Jumbo Shrimp, or their Trash Panda.

 

[Hunter609]

The Zero Gravity 6.5 is rated for 16" 6.5 PRC.

Have one on order , hoping it’s in Tuesdays batch