- Joined
- May 31, 2023
- Messages
- 297
We just launched a new product at T & K Hunting Gear.
The Kilo Suppressor Cover is our newest edition to the T & K gear family. Constructed of laser cut B52 Squadron, 1000D Cordura, carbon fiber, Nomex thread, and Kevlar nano cord (rear cinch). A fiberglass fire sleeve with a silicone rubber external coating can be added for an additional cost. Our suppressor cover has a rear cinch design to prevent the cover from slipping forward while shooting. 1" nylon webbing wraps through specific laser cut slots to tighten the cover around the fire sleeve (the barber pole). Several metal 1" triglides are used to cinch the webbing tight and prevent any webbing slippage. This is a great piece of gear to protect your can from the elements, while reducing the mirage as you send rounds down range.
Warranty Information: This product is designed for recreational long distance shooting, hunting, and other low rates of fire. It is not intended for semi/full auto mag dumps. Doing this will destroy the equipment and void the warranty.
Heat Specifications
Carbon fiber sleeve - 1800° F max temperature before melt/failure
Fiberglass fire sleeve add on - 500° F continuous / 2200°F up to 15 Minutes / 3000°F for short excursions
*The fiberglass fire sleeve add on is intended to provide additional heat protection if desired.
Let me know if anyone has any questions!
100% Made in the USA

The Kilo Suppressor Cover is our newest edition to the T & K gear family. Constructed of laser cut B52 Squadron, 1000D Cordura, carbon fiber, Nomex thread, and Kevlar nano cord (rear cinch). A fiberglass fire sleeve with a silicone rubber external coating can be added for an additional cost. Our suppressor cover has a rear cinch design to prevent the cover from slipping forward while shooting. 1" nylon webbing wraps through specific laser cut slots to tighten the cover around the fire sleeve (the barber pole). Several metal 1" triglides are used to cinch the webbing tight and prevent any webbing slippage. This is a great piece of gear to protect your can from the elements, while reducing the mirage as you send rounds down range.
Warranty Information: This product is designed for recreational long distance shooting, hunting, and other low rates of fire. It is not intended for semi/full auto mag dumps. Doing this will destroy the equipment and void the warranty.
Heat Specifications
Carbon fiber sleeve - 1800° F max temperature before melt/failure
Fiberglass fire sleeve add on - 500° F continuous / 2200°F up to 15 Minutes / 3000°F for short excursions
*The fiberglass fire sleeve add on is intended to provide additional heat protection if desired.
Let me know if anyone has any questions!
100% Made in the USA
