Stockys stock question

[wcasey755]

Hey all, I have a tikka I want to put a stockys on. It’s a T3X with the standard stainless barrel. I’ve read that it requires so fit and finish work. Anyone have any experience with that? Or online guides or videos? I’ve looked on finding one without luck. I’m decently mechanically inclined but I don’t want to get into a huge project either to make it fit.

 

[jmsdad]

Plug and play...Get it with the Alpine or m24 contour. Use 320grit sandpaper to go over the carbon shell inletting to get rid of sharp edges

 

[NWBLKTAIL]

I’ve had 4 personally none I would call a “big project” aside from bedding the recoil lug, maybe some minor sanding to get clearance for the barrel channel.

 

[bigunit]

I have 2 on tikkas and they're great. Very little if any inletting needed to be done. The bottom metal was a tight fit but it snapped in no problem.

 

[Macintosh]

Yeah, I’ve had two. Minor fitting if any. You can do it all with sand paper and a dowel if anything is needed. I think they sometimes benefit from bedding, but thats also a pretty easy project that really doesnt take much if you are diligent with your prep.