Stihl ms291 acting up

Team4LongGun

Super Moderator
Staff member
Joined
Aug 4, 2019
Messages
1,731
Location
NW MT
Very new, not much use on it. Once it gets warmed up, it starts acting crappy. Hard to keep running, bogs, have to stay on throttle well past cut.
Is there a carb adjustment? It did come from back east, and I am at 3500'. Not sure if this would be it?

Local repair is pricey, just for taking it in.

TIA
 

Attachments

  • IMG_3374.jpeg
    IMG_3374.jpeg
    412.5 KB · Views: 13

COelk89

Lil-Rokslider
Joined
Nov 18, 2022
Messages
198
Youtube for precise instructions, yes there are carb adjustment(s) on the bar side. Also some stihls have a little air blocker to put in during winter to run richer I believe.
 

Hoodie

WKR
Joined
Aug 6, 2020
Messages
979
Location
Oregon Cascades
I work from 900ft above sea level up to about 4000ft and have definitely had to make adjustments with that degree of elevation change.

Assuming air filter is clean, that's where I'd start. If it's new with not much use spark plug and spark arrestor are likely fine.
 

Marbles

WKR
Classified Approved
Joined
May 16, 2020
Messages
4,396
Location
AK
There is a carb adjustment, check the air filter and fuel filters.

Not particularly helpful for the OP, but my experience with Stihl is their Pro line is great (MS261 is the MS291's adult brother), but the Farm and Ranch and Home Owner lines are not woth paying for (I've had better luck with Husqvarna for the cheaper stuff).
 
OP
Team4LongGun

Team4LongGun

Super Moderator
Staff member
Joined
Aug 4, 2019
Messages
1,731
Location
NW MT
The first thought that came to mind was what kind of fuel it has in it, and how long that fuel has been in it.

The canned pre-mix fuels, left in a small motor over a season or two, seem to be causing more than a few tools to get a bit gummed up in the fuel system.
I only do non ethanol that I pre mix myself (y)
 
Joined
Oct 5, 2018
Messages
2,052
Location
Colorado
I seem to recall having similar issues on my 261 before and I think I determined it was old fuel that I just dumped out and it ran fine again. Maybe @Marbles is right though because I've had my 261 for 12 years and it has been very reliable with just basic maintenance.
 
Joined
Jun 21, 2019
Messages
2,550
Location
Missouri
The fuel line between the tank and carb on my MS251 will get rotten and develop cracks and cause the saw to struggle above idle. I’ve tried OEM and knock-off replacement lines and haven’t found one yet that lasts. I‘ve resolved to just keep a few spares on hand at all times. Different saw and somewhat different symptoms, but worth checking and cheap to fix.
 

BluMtn

WKR
Joined
Nov 24, 2016
Messages
1,050
Location
Washington
The fuel line between the tank and carb on my MS251 will get rotten and develop cracks and cause the saw to struggle above idle. I’ve tried OEM and knock-off replacement lines and haven’t found one yet that lasts. I‘ve resolved to just keep a few spares on hand at all times. Different saw and somewhat different symptoms, but worth checking and cheap to fix.
Ethanal gas will tear those gas lines up. When I was an Ag service manager we sold Stihl saws. My saw guy had a box of those fuel lines on his bench. When a poorly running saw came in he would change that fuel line and 95% time it would fix the problem.
 
Joined
Jun 21, 2019
Messages
2,550
Location
Missouri
SheugEthanal gas will tear those gas lines up. When I was an Ag service manager we sold Stihl saws. My saw guy had a box of those fuel lines on his bench. When a poorly running saw came in he would change that fuel line and 95% time it would fix the problem.
I only run non-ethanol fuel in my saw (and only use Stihl fuel oil FWIW). Fuel line still rots in a matter of months🤷‍♂️
 

BluMtn

WKR
Joined
Nov 24, 2016
Messages
1,050
Location
Washington
Interesting, my Stihl is 14 years old and still has the original fuel line in it. I use non-ethanal with seafoam.
 

mxgsfmdpx

WKR
Joined
Oct 22, 2019
Messages
5,734
Location
Outside
I’ve had to lean mine up a bit when going from 1,500 feet at home to 5,500 feet at our old cabin.
 
Last edited:
Top