Staball 6.5 as good as they say?

[Steve300xcw]

Very!

Mighta learned something 'bout that this weekend

48,49,49.5gr.

 

[NorthIdahoDude]

Where do you get your load data? Or do you just watch brass for pressure?


Sent from my iPhone using Tapatalk

I work from a combination of their published data, Quick Load, and watching for pressure.

 

[Gstew1930]

Mighta learned something 'bout that this weekend

48,49,49.5gr.

View attachment 981244

ive had 3 pcs of brass that look like that from the same load lol

 

[Steve300xcw]

You need a better scale!

 

[Gstew1930]

You need a better scale!

Supertrickler is pretty good lol

 

[justin davis]

Am I mistaken in thinking their app data is typically very slow compared to other Win/Hog/IMR/Alliant powders? At least in cartridges like 6.5cm,6cm,243, etc. 223 seemed about normal

Someone a while ago told me it was because the Europeans have different pressure standards but I could have misheard


Sent from my iPhone using Tapatalk

I use the hornady data and they have data for N555. I find that about 2 grains over H4350 is equal to H4350 load data

 

[EastHumboldt]

I wasn’t really paying attention to temp stability, but my Tikka in 30-06 liked it with 165g Sierra SBT’s, and my brothers same rifle 178g ELDX. Very good velocity in both rifles and certainly accurate enough for hunting. Shot in weather conditions from fair high 80’s to shitty and snowing. Probably 800 rounds between the two rifles.

We both have T3’s in 7-08 shooting 150g ELDX. Velocities around 2780 ish, 1.25 moa very consistently. Shot in conditions from mid eighties to near freezing, porbaly 3 times a month since July. Also around 7-800 rounds. I’ve developed another load using Sierra 150g SBTs. Haven’t shot that many yet.

Ran a few hundred rounds through two different .243’s. Also no problems.

So it’s versatile and available. And I’ve gone through about twelve pounds of It in the three different calibers. It seems to run a little dirty, leaving dark marks around the neck. But I’m kinda new to reloading so maybe most powders do this? I’d agree that it’s a little spiky when you get into pressure so I stay well below max loads.

So I’ll throw this out here. Do you guys think it runs dirty?

Edit: I did some math and revised my round counts.