So I purchased the Precision Tuning course from The Push…here’s my honest opinion.

[TravisIN]

For me who’s pretty new to trad, it was worth it.


Sent from my iPhone using Tapatalk

 

[Guncap]

I'm still relatively new to traditional archery but I got Precision Tuning and Solid Archery Mechanics two years ago and have spent a ton of time with each. I find Precision Tuning to be very useful, and I think the best part of it is the troubleshooting section where they break down different form/technique flaws that can give you false readings on a tune.

Solid Archery Mechanics has been useful for me as well, but to a lesser degree. Like others have pointed out, Jake Kaminski pretty much has the whole NTS shot cycle that Tom covers on YouTube for free. Tom goes into greater detail with each part of it which can be helpful.

 

[TravisIN]

I'm still relatively new to traditional archery but I got Precision Tuning and Solid Archery Mechanics two years ago and have spent a ton of time with each. I find Precision Tuning to be very useful, and I think the best part of it is the troubleshooting section where they break down different form/technique flaws that can give you false readings on a tune.

Solid Archery Mechanics has been useful for me as well, but to a lesser degree. Like others have pointed out, Jake Kaminski pretty much has the whole NTS shot cycle that Tom covers on YouTube for free. Tom goes into greater detail with each part of it which can be helpful.

The troubleshooting helped me a ton. Something like different pressures on different fingers is something I’ve never had to worry about. This was a 25 yards today. I understand that’s nothing special. But I can confidently say, I wouldn’t be able to do that without some things I learned in that course.

Sent from my iPhone using Tapatalk

 

[ErikT]

I enjoyed the PT course and found it to be worthwhile and worth the $200 for lifetime subscription.
I've been building arrows for 30 years and shooting trad for about the same and learned a lot. The problem with finding all of the course instruction online is filtering through all of the BS and finding valid sources that present accurate information on the entire scope of bow/arrow tuning, let alone having it all in one spot. The Ken Beck video was great and informative but didn't even scratch the surface of what the PT course provides.

Most guys shooting trad for any length of time have a poor grasp to moderate grasp on these subjects. Understanding too stiff, too week, nock high, nock low, is one thing and being able to shoot bullet holes at 3ft, 6ft, and 12ft with a properly tuned set up is another. Most trad shooters out there are not capable of doing this on their own by simply watching a few YouTube videos. ... Let alone having proper archery form to execute said shot. And that's where Solid Archery Mechanics comes in. Think about all of the stuff "you" piss away $200 on and think of the lifetime of value that a $200 spend could bring. Also spending $150-200 on a dozen shafts and then wasting half of them with poor tuning methods gets pricey. That's my take on it, anyway.